Search the Community
Showing results for tags 'tapping'.
Found 3 results
-
As some of you know, I have a problem,,,, I know what you are thinking, but this is a new one. I ride a 2014 Spyder and installed JMCB 2003 for a CB and intercom. The intercom works fine, and the CB broadcasts just fine. Now if we get 2 CBs close together I can hear the other, if they are more than 4ft apart I can't hear the other person. I can hear a tapping on their mic, but no voice comes through. Now hear is the next problem then. I contacted JM corp and they would like me to try to use one of their headsets. I use the Edsets with the proper cord, but they were wondering if I could try one of theirs. SO!!!! anybody in the area have a set they could lend me??
-
Everything seems to be running fine on my 97 RSTD, however I recently installed a windshield, which allows me to hear the engine noise much better. When I reach 3rd gear, I hear an "intermitant tapping" sound. It doesn't occur in any other gear and is not a bang or a grind, but can be best described as if I had hung a very small pebble by a long string and let it bounce underneath, occasionally tapping against the bike. It is a very mild sound, and sometimes can even be heard if I pull the clutch in at that gear.... I am wondering what it could be? Any thoughts -
I have an 06 RSV with 6 K miles, it has started making a taping sound like lifters tapping almost to the point of a light knocking sound when you first start it up. After a minute it goes away. Is this just normal for this engine? I like this bike but it has the noisest engine of any motorcycle I have owned. Between this tapping noise and the 70MPH wine. I am running 10W40 Synthitic oil, should I run 20W50 instead? Thanks for your help. Dandy1
