Search the Community
Showing results for tags 'tapered'.
Found 4 results
-
I just got my seat back friday and you did a great job thanks again!! I do want to give a warning out there I went to put the seat back on and I put the bolts and stuff were I wouldnt lose them now I cant for the life of me remeber were I put them and the seat bolts are tapered so I have to order some. I just cant win for losing sometimes. Thanks again Rick and I hope to get alot of use out of it this summer.
-
Hi y'all, This question is in regards to the two adjuster "ring nuts" that set the bearing preload. The factory manual says somewhat cryptically, "The tapered side of the ring nut must face downward." This is repeated for the other ring nut, so they are evidently both supposed to face the same direction. I'm not clear on what the "tapered side" is, and the pictures in this manual stink. The two nuts appear to be identical. One side is flat. The other side has a slightly raised rib running around the face of the nut, as well as a conical cut or chamfer around the inside by the threads. I guess that could be considered a taper. When I took mine apart they were not facing the same. The lower nut had the flat side up and the upper nut had the flat side down so that the rubber washer was sandwiched between the flat sides. Any opinions? Does it really matter? Jeremy -
a stupid question at work ordering frilly crap for the bike . are the levers on a second generation wide or tapered?
-
stupid question , im at work ordering frilly stuff for the scoot are the levers on a second generation wide or tapered
