Search the Community
Showing results for tags 'skydoc_17'.
-
Good morning everyone, Since purchasing a non-running '92 VR back in January, I've gotten it running and have everything working on it except the back/left front brakes. I rebuilt the master cylinder and the rear brake caliper. It wouldn't bleed. I removed the line going to the front at the master cylinder and plugged the master cylinder with a flanged bolt. Back brakes bled out fine. I have intentions to de-link the rear and front brakes, but I want to get this thing fixed first. As I don't yet have the money to upgrade yet. As part of the de-link process, I've read on this site that many people are using YZF-R1 or R6 calipers, so I got a set of blue-star front calipers off an R6. $49 bucks on eBay with no shipping charge. Tested them on the bench and they looked like they were working. After installation, still couldn't bleed the brakes. I got a 65cc syringe and attached a piece of clear tubing to it and tried to pull brake fluid through the line that way. No love there, as the syringe would pull a vacuum but when I let go, it would just snap back. I felt like something was stopped up. I loosened the bleeder up by the handle bars and tried again, same result. I must be stopped up somewhere between the caliper and the top bleeder. Ok, so what now? I went out to the barn and tried the same thing on an '87 donor bike I have. I could pull air through its line just fine. So, I removed that brake line and installed it on my '92. Now when I use the syringe method of bleeding, I can pull brake fluid all the way from the rear master cylinder reservoir to the front left caliper. HOO! RAY! Finished bleeding the brakes and now I have a decent pedal and feel like I can do an upgrade from a clean baseline when the time comes (that translates to, when I get the money). If I hadn't already spent so much money on this bike, I would've already gotten the brake upgrade kit that Skydoc_17 sells and I will. Here's the link to his kit: http://www.venturerider.org/classifi...line-21&cat=22 I post this to help encourage others that it is possible to clean up a 20+ year old brake system. On bikes that have been sitting up for many years, a stopped up brake line might be preventing you from bleeding your brakes. Important: If you have an older bike (20+ years old), it would be in your best interest to replace as much of the old system as you can afford as stopping is so important and no one needs a surprise in an emergency on a high-powered 800 lb. bike. Let's go riding.
-
HAPPY BIRTHDAY SKYDOC_17:Happy Birthday:
-
As both a procrastinator and one who's latest promotion has consumed a ton of my free time, I admit that I have had almost all of these parts sitting on the shelf for a full year. What a colossal mistake on my part. The last bit I was holding out on was a 14mm master cylinder. I found what I wanted on eBay last week -- had to strip and refinish, but that took less time than I expected. Skydoc_17 had provided the SS lines (I asked him to special order black so it would look more like stock and it does) and VMax splitter; all of which were still in the sealed USPS box that he mailed them to me in. I cleaned and painted my eBay sourced R1 calipers solid black to get rid of the blue anodized stars. Installation was straightforward and uneventful. Since I already had the bike torn down for the valve adjustment (another big thank you to skydoc_17) it was a couple days before I could get it on the street. My initial impression was, lets say much below satisfactory. I was actually pissed within the first 2 stops at how much time I had put into the project. To be fair, I had gone cheap and reused whatever pads (still had good meat, no idea what brand) were loaded in the calipers. Fortunately, my local shop had a pair of the EBC HH pads on the shelf. Second impression was light years ahead. I couldn't have asked for a better result. The albino water buffalo now bleeds off speed equivalent or better than any other big touring bike I have ever owned or ridden. If you are on the fence, let me shove you over to the other side. Even if you stick with the stock 5/8" master cylinder, its a step in the right direction. Iz
-
Anyone knows the where abouts of skydoc_17. I've sent 2 pm's requesting information on the fuse kit and progressive springs but no answer.
-
I just did my clutch up-grade and what a difference. Makes me wonder how long this darn thing has been slipping, I can't remember when it last ran like this. She really hooks up now. The cluth disks did'nt look too bad, a little blued. I sanded them a little (cross hatch) and put it back together, NICE! BIG THANKS! Carl:thumbsup:
-
Ordered a slew of parts, just the other day, from this fellow. I can not say enough about the speed of receiving the parts nor the complete and thorough instructions received. I have them in the box, on my e-mail and on this site. WOW! Anybody holding off on any of skydoc's upgrades.....don't. I can attest you will not be disappointed. Thanx skydoc_17 P.S. This is soley the opinion of the author and author has in no way been enticed with favors or financial gain.....I could be though!!!!!