Search the Community
Showing results for tags 'shifter'.
-
I cracked open my faring today and removed the cassette player. Anyway I dropped the spacer for the light bar. I thought it went into the front cowling. so I took them both off. I found what looked Like a horn under the shifter side. Hit the button and sure enough it is a horn. I thought the horn was on the break side with the chrome cover circled in the picture. Hit the button & nothing happened there. So is this a horn or what?
-
I have a 2006 RSV. Yesterday, when I went to downshift for the toll booth, I found I had no shifter. It was laying on the foot board. I stopped and slipped it back on to its pivot shaft and got home fine. My question is... What holds it on the shaft? The shaft has a groove machined in it all the around about half way on its length. But I see nothing on the shift lever that indicates how it is held on???? Thank you in advance CG
-
Has anyone in the last couple of years purchased a set of Markland Floorboards with Heel/Toe Shifter. for an MKII on ebay? If so could you tell me what you paid for them. I need some reasonable price comparions for an insurance claim. -
The trip was great, see "whats in the bags" last thread. Clocked near 600 miles with the wife on back and plenty of extras. Lots of short runs and stops, great roads and scenes, and one place we gotta see for a full weekend, Medicine Park, OK- was only there long enough to eat and take a short walk but its worthy of a return trip. My wife was much more comfy than I through the entire trip, at points I could not control my own whining:( The bike performed flawlessly. My hipjoints are pinching hard, Im not liking the heel shifter at all, and even with pegs on the engine gaurd I have few choices to vary position- especially on the left side. I find my right foot far back on the board at times, usually in town. my left is rough because I cant just put my foot down, Im 6'3" and that heel shifter, if I get past it, other hard parts get into my calf- so Im kicking out coming to a stop and kicking up to roll out. Im gonna give some more time for the boards, but Im fairly sure the heel shifter is gonna go bye bye. Ive seen zero options for forward controls on 2nd gen RSVs, if anyone has info here please share. It seems there would have to be mods to intake? whatever all that stuff is below air filters... I love the Venture, but I want to make it MINE! Did I mention my wife loves it too:)
-
The heel toe shifter on my 83 is flopping around on the shaft. The hole in the aluminum shifter body has gone oval shape and it makes shifting less "secure" if that's the right word. Feels uncomfortable in that I'm not really sure I AM getting to the desired gear or if the shifter just moved under my foot. (I've rarely missed a shift...but you know what I mean.) Is installing a bushing something I can do myself? I don't really want to pay for an expensive machinist job! I am assuming I drill out the hole in the aluminum shifter to the outside diameter of a bushing that would fit tight over the shaft. What would stop the hole from wearing out again? Where does someone buy bushings?
-
Hi all Interesting thing happened today....Wife and are out for a nice Easter ride, about 45 miles or so from home, when I go to downshift while approaching a light and wa-la, my shifter is laying on my floorboard. I pull into a wide spot (the wife follows me in on her Shadow) and guess what? the machine screw (that holds the heel toe in place is somewhere on Rt 33. I put the shifter back on and all is good ( I hold it in place with my foot after each shift). Now what I can use is the exploded diagram of the shifter for a 2005 RSV midnight. Thanks inadvance.
-
i recently noticed a green fluid leaking from under my bike and cannot tace it.It started after the bike had been sitting for a month.There are small beads of green fluid on the frame.and also the shifter rod.I cannot find where it could be travelling from.The only thing that looks like it needs to be replaced is the rubber cover that is at the end of the shifter rod,which is completely worn out.Any ideas where i should start? Thanks Randy:confused24:
-
2nd gear ??? HELP ME!!!!
talonsx2 posted a topic in Venture and Venture Royale Tech Talk ('83 - '93)
put the bike back together after 2nd gear rebuild and am at the point where I should be able to check operation except something aint right.... So here is the question= put the shifter in what is supposed to be 1st gear and the indicator states 5TH gear???? What the heck is up with that? thanks in advance, mike -
.thumb.jpg.9dfefb49018580a1813c8128f131546e.jpg)
hi everyone! im taking off the heel toe shifter on my first gen. kinda sloppy. i bought a toe shifter and bracket off ebay. can i get some close-up pictures off how its mounted? is it adjustable? thanks for the help. -
Once again i find myself pulling the clutch to replace those dang pins.I bought my 83 Venture a year ago and this will be my third tear-down. I do recall a thread about an updated mechanism for this staR SHIFTER some where, does any one recall what the part number or year of bike it will update to Thanks
-
OK, I'm new(oob) to this forum so maybe I'm just not adept at searching yet but I'm sure I saw a thread with instructions and part numbers for replacing the shifter segment with a VMax or later model Venture. This is to fix the loose dowel pin issue. Ride safe, Mike
-
I just purchase a 96 RS XVZ1300 and have noticed that the toe/heal shifter is physically loosening up from the post when shifting. I have pulled the whole assembly back to the tranny and cleaned/greased all the joints since it appears to have never been done. The washer/screw that secures the shifter to the post didn't look right so I replaced with hardware from BB. After all is said and done the thing is still loosening up? The shifter assy is a bit out of round but not too bad so I have not replaced it yet. Is this a known issue with these bikes? Anyone else experience this problem and if so what's the fix? -
today went to work no problems. comeing home after about 7 miles of easy riding started to feel clutch was going away, had to pull it all the way to grip hard and had to stomp at shifter to change gears. it would take bike out of gear ok at stops but had hard time getting it into 1'st. then almost home had to keep it in third.( i didnt want to brake shifter stomping it )got home and couldnt get it in neutal till i just put stand down then could move shifter like normal. its too dark to see now but there is no leaks, master is a hair over half in site glass, the fluid should be changed as it looks on the brown side. but i dont know if thats the problem. what do you think? it is 83 venture xvz12tk thanks:confused24:
-
83 vr trans issue
crossedthreads1 posted a topic in Venture and Venture Royale Tech Talk ('83 - '93)
left work today laid the bike down on right side very easy while in 1st gear probably 7mph I pick it up, shake it off, ride home. I no longer have 4th and 5th gears . the bike shifts 1,2,3, and that's it. Shifter feels just like it is in top gear.Everything feels normal it just only a 3 speed now. Anyone hear of this before . thanks -
On our way to the 911 ride last week we were riding with five HDs. While on the QEW near Niagara Falls, doing 70 mph I had pointed to somthing on the road with my left foot and when I put my foot back on the floor board something felt funny. I looked down and there was my shifter sitting on top to the floor board. Off to the shoulder we go. Now picture all these Harley guys standing around and laughing while I quickly removed a bolt from my side cover and put my shifter back in place. Thank you venturerider.org without you I would have never known how to make that road side repair. But I still can't believe it happened. I check that bolt all the time and I have 80,000 kms on the bike. So guys, be warned, keep an eye on that shifter bolt. Not to be out done, two of the HDs developed some pretty nasty oil leaks while on this trip too.
-
I was going thru some of the gallery and saw that some of the 1st Gens have floor boards instead of pegs for the driver, was this an option that could be specail ordered with ROYAL pkg? Does any one have any or where can I look for some, also is there a rocker shifter {heel toe} that goes with this?
-
I really need to get rid of the heel portion of the shifter. I don't use, its in my way. Where can I find a single shifter for this '08 RSV?
-
I did the stator and starter clutch on my 89. I had a moment as they say, I didn't appreciate the difficulty posed by the re installation of the shifter linkage. I convinced myself that I had it right a couple of times. I was wrong. If anyone can grab a few photos from a few different angles, it would be a big help. I appreciate the help. Thanks to you all. -
Is it supposed to be possible for the trany to go directly from any gear to neutral? This has happened on this bike about twice a year, where while during somewhat aggressive acceleration, I will suddenly find the bike in neutral, no connection between the engine and rear wheel and the neutral light on the dash is illuminated and the "N" is displayed on the gear indicator. I can understand it happening between 1st and 2nd if you short stroke the shifter since you are going thru neutral on the way to second. But I have also had this happen when going from 2nd to 3rd and 3rd to 4th. I look down and the gear indicator shows "N", the green light is on. There are never any kind of grinding or other strange noises other than a very high engine rpm due to lack of connection to rear wheel. Is this an indicator of some major trany problems coming down the line in my near future, or just a glitch in the system. I am posting because this happened 3 times on the way in to work today. All three today were going from 2nd to 3rd, no drive connection, "N" showing and green light on. Lifting up on the shifter again, and it went into 3rd like it should have done the first time one time it went to 2nd. I may be short stroking the shifter a little since I am getting used to some new riding shoes that are thinner on top that what I had before. but I still did not think there should be a full and indicated neutral between 2nd and 3rd or 3rd and 4th.
-
The Chrome End Nut on my heal toe shifter keeps loosening. Looking for the right fix. I've attached two pictures. 1st of the Heal Toe shifter and shaft, 2nd the Chrome End Nut. I had this appart this last winter and can't seem to find all the right pieces. My thought would be to get a thin metric nut with nylon locking threads to keep the nut from loosening against the Heal Toe shifter. Then lastly put the chrome end nut on. Open to suggestions.
-
Friend took his new to him RSV in to get an oil leak checked out and was told that the shifter shaft had play in it and oil was leaking from the "wallowed" out area of the crankcase around the shifter shaft. I have never heard of this nor can I find any info on such a thing happening. Shop says it will be $6000 to fix because you have to replace the ENTIRE crankcase and basically rebuild it all. Assuming they are right, is there any repair for this? The bike shifts fine and is excellent otherwise. -
I have had my 08 Venture since May last year. It is the first bike I have had with a heel shift. The only advantage I see to the heel shift is that it saves wear and tear to the top of your left boot. I do not need to move my foot from its rest position to shift up if I use my toe, whereas I must move my leg back and lift it to get the heel on top of the shifter. So, my question(s): How many use the heel shifter? What advantages do you see to using it? Is it worth the effort to retrain myself to use this feature? Thanks for any thoughts.
-
transmission / shifting trouble
massey130 posted a topic in Royal Star Venture Tech Talk ('99 - '13)
i have been having trouble with my 04 RSV. I have been posting in the watering hole, but so far i have not found the problem. it has trouble shifting. clutch and its fluid checks out ok. the shifter linkage checks out ok. i pulled the middle gear cover off (left rear cover) and it checks out ok. thinking it was an engine oil level, oil was changed this started out of the blue. i parked the scooter after a ride when shifting was working properly, found a slow leak, ordered a new tire, put the tire on. went for a test ride. shifting up was fine and the trouble started upon my first down shift, it would not down shift. i could come to a stop and pound on the shifter getting back to first. then repeat. after a couple times of this, the shifter began to "flop" out of place. not left or right. when toeing up to 3rd, the shifter just kept moving upwards nearly 5 inches with no changing of gears. i would have to toe the down to get things back to an order where i could get home. coasting around corners does work too well and lugging around in the wrong gear is not the way to do things. any suggestions as to what is happening would be appreciated. -
With all the foul weather, the old girl is taking a cold weather nap. Started her today and noticed that oil is coming from the shifter stem. I assume there is a bushing of some type???? I have never had a drip from there before. How do I stop the drip??? joe:starz:
-
heal toe, to toe shifter
showmebob posted a topic in Royal Star and Royal Star Tour Deluxe Tech Talk
Has any one converted the heal toe shifter to a toe shifter on a 1986 royal star ?
