Search the Community
Showing results for tags 'qty'.
Found 4 results
-
With approval of Don (Freebird), I contacted Rumbling Pride regarding having new flags made. Their flags are highway speed rated and double stitched. You can see below their response. Shipping charges would also be applied (from Don's location). What we (Freebird) would like is to get an indication of how many members would like a flag and how many. In my case, I'll take two (one for use now, and one for future). http://www.rumblingpride.com/ http://www.rumblingpride.com/Flags_Masts_Access.htm http://www.rumblingpride.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=RP&Category_Code=BAR-K ------------------------------------------------------------------------------------ Thank you for contacting us, we would love to provide you with a quote for your custom flag order. This is what we can do for you and your group! For a quantity 100 - $9.00 ea.; qty. 250- $8.00 ea.; qty. 500 $7.40 ea.; qty. 1000 - $6.55 ea. A proof of your flag would be sent for your approval prior to flag production. If you like I can send you one of our sample flags so that you can see the quality of our product. Just please advise of a ship to address and we will get one out to you asap! Our flags do have a lifetime warranty if flown on one of our mounting kits. For replacement you would need the flag and the proof of purchase/receipt. For your group of riders on the Venture, we recommend our Fold-down Bar Mount in Standard or Premium. I can also offer you a 20% discount on all mounting kits. Thank you for your interest in our products and if you need further assistance please do not hesitate to contact me! Maryann Rumbling Pride Ltd.Co. 863-859-0533
-
After some winter maintenance, I started the bike up for a short test drive. When I came back, coolant was leaking pretty badly from the weep hole under the water pump. Guess its time for a rebuild... After searching the forums last night, I haven't seen a complete parts lists or technical aid anywhere, so thought I'd try to document it all in one place. A couple questions: 1. I found in another post that P/N: 1FK-12450-00-00 is the newer metal impeller and that the plastic one was only used on MKI 1st gens. Can anyone (or a few people) confirm that this is indeed the metal replacement? I went through several years of bikes on Part Shark and they all listed this same P/N, but didn't indicate it as a replacement for obsolete part, which raised some suspicion. 2. Should I replace the thermostat too? 3. How do I get the water pump housing off without breaking the 90 degree plastic elbow joint between the thermostat and pump housing? Does it just slide/press in with the O-ring? Is it best to pull it out of the thermostat housing when pulling the pump housing off the case? Does it come easily or is there a safe method to pry/pull on it? 4. Is it necessary to replace the plastic gear (item 4)? I assume its worth $14 since I'll have it all apart, but just checking. 5. Will oil come out (do I need to drain oil) when I pull the water pump housing off the case? 6. What is item 3's purpose (Pin, dowel)? Should I replace that? Is it pressed in? 7. I'm planning to replace all the parts below. Am I missing anything? 8. I've read that success rate on a rebuild is not good. What are common mistakes or causes for this? What do I need to watch out for? Thanks in advance, everyone! Rebuild Parts List: 1FK-12450-00-00 – Qty 1 IMPELLER SHAFT ASY for 1984 YAMAHA XV 1200D Item 2 – this is supposedly the metal version, original was plastic $39.72 11H-12438-10-00 – Qty 1 SEAL, MECHANICAL for 1984 YAMAHA XV 1200D Item 8 – ceramic water tight seal $19.54 93101-10090-00 – Qty 1 OIL SEAL,S-TYPE for 1984 YAMAHA XV 1200D Item 7 $2.52 93306-00004-00 – Qty 1 BEARING for 1984 YAMAHA XV 1200D Item 6 $13.05 99009-10400-00 – Qty 2 CIRCLIP for 1984 YAMAHA XV 1200D Item 5, 2 places $1.18 26H-12459-00-00 GEAR, IMPELLER SHAFT Item 4 $13.86 ----------------------------------- 93211-16591-00 – Qty 1 O-RING for 1984 YAMAHA XV 1200D (Outer Impeller Case Cover O-ring gasket) Item 9 $5.05 214-11198-01-00 – Qty 1 GASKET for 1984 YAMAHA XV 1200D (Drain Plug O-ring) Item 12 $1.25 3JP-12449-02-00 – Qty 1 GASKET,WATER PUMP for 1984 YAMAHA XV 1200D (Gasket for main case housing) Item 14 $5.02 93210-27778-00 – Qty 2 O-RING for 1984 YAMAHA XV 1200D (O-ring seals for elbow joint between Pump housing and T-stat) Item 19 $1.45
-
Last chance to order I will be placing the order tomorrow morning. The 5 3/4 inch are costing approximately $5.30 US Dollar The 7 inch are costing approximately $7.00 US Dollar The remainder size cost will roughly vary I'll figure out the shipping/postage later. After I figure out the cost per person I will email each. PayPal or check payment will work This is what I have so far. Ponch 3 1/2 inch wide Qty = 2 Bongobobny 7 inch wide Qty = 1 Camos 9 inch wide Qty = 2 Jazzmann320 5 3/4 inch wide Qty = 2 Bubber 7 inch wide Qty = 1 Golf&Venture 9 inch wide Qty = 1 Golf&Venture 7 inch wide Qty = 1 Golf&Venture 3 1/2 inch wide Qty = 1 Attached is a prototype of the patch. The smaller the size the details are not a crisp. The provider recommended that 3 1/2 inch width be the smallest. Last Call.
-
Digital tach group buy is now closed. Tachs have been shipped to members that ordered them on Monday, February 8, 2010. Gary ================================================================ I received the digital tach today that I had ordered from an ebay vendor. He sells these tachs in an auction style format and they vary widely in price. Prices for the last 6 on Ebay incl. First Class shipping were $21.19, $19.19, $17.69, $19.19, $34.69, $20.00 These tachs would be very useful when doing carb synching and adjusting the pilot air screws. He will sell me a bulk order of 20 or more for a fixed cost of $14.50 including shipping to me. The tach is 2" x 1 3/4" x 3/4" Mounting tab holes are 2 1/2" apart, 2 7/8" wide at tabs. Display digits are 3/8" tall. Over cable length is 66". There is about 12" of dual lead cable. One for spark plug sensor & one for ground. The tach can be set to read RPM's once every revolution, once every other revolution or twice per revolution. RPM display updates every second. Readout is to 99,999. First picture below shows how I received unit out of package. Last picture shows tach attached to my Dodge Ram. Bike is not even close to running at this point. Also tried on lawn mower and it worked great. All you have to do is coil black lead at end of cable around spark plug wire two or three times. It doesn't even have to be grounded to read RPM's. Prices below include shipping costs. (Qty 1) First class for 17.50 to U.S. (Qty 2) First class for 32.50 to U.S. (Qty 1) 2-3 day priority for 20.00 to U.S. (Qty 2) 2-3 day priority for 34.50 to U.S. (Qty 1) First class for 18.50 to Canada. (Qty 2) First class for 33.50 to Canada. (Qty 1) 6-10 day priority for 26.00 to Canada. (Qty 2) 6-10 day priority for 40.50 to Canada. I can get two units in first class mailer and 4 units in small priority box. I would recommend priority mailing. The packaging will be better, I can use USPS supplied box. And it is much quicker and I can get a USPS tracking number. I have recently seen first class mail take almost two weeks transit time. U.S. shipping is to lower 48 states. If you want one or more of these please respond to this thread, or you can PM me. Gary Red highlight below indicates I have received your payment. 1 LilBeaver 1 BigBoyinMS 1 KeithR 1 Pick 2 islandmech 1 Snaggletooth 1 Bubber 1 Sleeperhawk 1 jonsey 1 hlange 2 short-haul 1 bigbob 1 jlh3rd 1 Norm 1 Sling 1 Stud Muffin 1 wngrr 1 BJB 2 mbrood 1 rhncue 2 sleeepy2 1 colesgrandpa 1 RandyR 1 MiCarl 1 67mini67 1 Gibvel 1 dthomso1 1 genelegg 1 Pktexas 2 Bloodbrought1 2 guthdaddy17 1 herb in texas 1 Truckin48 1 Thom 2 Mabeline 2 warthogcrewchief 1 Eagle77 2 Beau-Kat
