Search the Community
Showing results for tags 'p/n'.
Found 5 results
-
I'm working on putting the original engine for my MKI back together. It hald fallen off my trailer and the valve covers and a couple side covers had gotten cracked and/or beaten up. With the help of some generous members, I think I have everything I need to put it back together. So now I have all the parts and a bucket full of bolts sitting on my work bench. I'm trying to figure out which bolts go where. Unless I'm not looking in the right part of my manual, it only tells me the diameter of the bolts that hold the part in place. As in 6mm,8mm, and 10mm. But how long is the bolt supposed to be for that particular hole? I can look at a microfiche and find out the P/N for the bolt, but still no dimensions. Would anybody happen to have some sort of reference that can tell me the lengths of the bolts according to either P/N or location? Thanks, Bill
-
Just replaced all 10 switches on my radio circuit board. All 10 were bad!! Radio works great now! Memory locations program, it's all good. Got 'em from Mouser Electronics; http://www.mouser.com $.26 each Mouser p/n 688-SKHHAM, manufacturer p/n SKHHAMA010 6.0x6.0x5.0mm Fit like a glove, no mess, no fuss! Ordered on 21 Dec, showed up on the 23rd. If you need radio switches, go here!!
-
I am getting some highway pegs, and I like Kuryakyn despite the cost. Due to my stature (or lack thereof, 30" inseam plus "muscular" thighs), I am getting the Longhorn Offset Peg Mounts (P/N 7985). What I don't know is which pegs to attach to it. I like the look of the Flamin' Switchblade (P/N 4412). What I don't know is how comfortable they are? Can anyone with experience with these Flamin' Switchblade pegs speak to the long-ride comfort? They look cool, but the flame part seems to be narrow on the ball of the foot. I am not sure how effective the heel rest part is. I like the look, but I want it to be utilitarian first of all. I'm not getting highway pegs to make my bike look better, but to support a 3000 mile ride. My alternate is the Switchblade Peg (P/N 4445), which looks kinda dowdy but is undoubtedly effective. I've heard nothing but good things about the heel rest on these, but perhaps it is because the peg portion is wide enough to support a range of boot positions. So, anyone here have the Flamin' Switchblade? Are they durable and comfortable?
-
I have checked a parts fiche. year 1999 lists p/n 4XY88143-00-00. All other years lists p/n 4XY88143-10-00. Does anyone know if I can do a direct swap from a newer model year to a 1999 model year? I am just looking at the top antenna piece above the mounting bracket. Thanks.
-
Anyone have the p/n for it? I couldn't find a listing that showed one available for the Venture. Thanks.
