Search the Community
Showing results for tags 'nano'.
Found 3 results
-
This is the cheapest and easiest ipod mount that I have found. It cost me about $9 for the case and I had the hose clamp in my tool box. Here is how to do it. 1. Use a razor blade to cut out the soft lining in the back of the ipod case directly behind the circle cut out of the face of the case. 2. Open the case and lay it flat on it's face. 3. Mark and cut two horizontal slots on the back of the case about 1/2" apart and about 1" long. Try to center the slots where you removed the soft lining. (I used a dremmel with a cutting wheel to cut the slots. They do not need to be wide, just completely through the metal) 4. Use a grinding attachment to smooth out the rough edges on the slots. (This step is important! It will prevent scratches on your handlebars and ipod.) 5. From the INSIDE of the case, push on the piece of metal between the two slots that you just cut. You don't have to push hard, just enough so that you can feed the hose clamp through them. 6. Feed the hose clamp end through one slot from the back and out the other slot and then feed it around the handlebars. 7. Adjust to final mounting position and clamp down tight. I have attached some pics below. I hope they help. Here is the link for the case although I found mine at Walmart so I did not have to pay the s&h. Check there before you order online. I have the 2nd gen ipod nano. 1st gen ipod Nano: http://www.accstation.com/dappnanolc18.html 2nd gen ipod Nano: http://www.accstation.com/dappnanolc52.html 30g-80g ipod: http://www.accstation.com/dappipodca23.html
-
I would like to add a power supply (hard wired) off my 12 volt supply to run my 5th gen. Nano. Anybody have a clue. I have seed it on other RSV's but never asked the important questions. -
Was wondering if anyone has had experience on this issue? Seems like the touch screen wont work too well with riding gloves on. Was also wondering if the wheel controls on the nano and/or classic are big enough to use with gloves on? I searched the threads and it looks like the ipods are working for people, but wasn't sure on the controls. Would appreciate any help/thoughts. Thanks. Bob
