Search the Community
Showing results for tags 'mics'.
Found 6 results
-
i just got my first Venture an 08 have 2 helmets with J&M headsets i know thay are good,,all the stereo,cb ,cass,every thing works but my mic's dont,,driver or passenger DOES not work on intercom or cb,,i know i have missed a post but i did look before i bothered you guys,,thanks for any help
-
On the way to work last night I got on the throttle in 3rd gear and around 6 grand on the tach the clutch slipped. This is the first time it has given me any trouble. I have a set of EBC springs I picked up on Ebay, anybody ever used them?? I am going to pull it apart this weekend and rough up the steels and put the new springs in. Anything else I should do while I have it apart that you can think of? I wish I could mic it but my nephew is going to school for machining and I gave him my mics to use. -
I am wanting to test the factory intercom on my 1st gen Venture. The bike has the plugs in the amplifier for the headsets. I did not want to invest in new headsets until I know it works. I have searched through the forum and can't find any answers. I found the pinout diagram for the plugs and made two headsets from some computer headsets I had laying around. I can get the speakers in them to work but can't get the mic to work. I don't know why. Is the stock system capeable of using the mics or am I wasting my time? Or are the mics from the computer headsets not compatable with the Yamaha intercom? Any input is welcome.
-
I really need to do something about the constant engine/pipe noise when I'm riding with my wife. I've seen posts about both quiet mics and mic-mutes. Is one better that the other? Is there a preference here to one over the other. Thanks.
-
I am in Perth, Australia. I have recently purchased a 2006 Venture and have wired in our head sets from a custom made audio system from another bike. The speakers work fine, but the mic's don't. I've got the correct plug pins order from Gary L Mace on this website, checked all my wiring thoroughly, checked for short circuits and continuity, adjusted the intercom volumn, set the audio system to HS, made sure both rider and pillion sets are plugged in and even made up additional test wiring harnesses, front and rear, with 5 pin plugs at one end and aligator clips at the other and connected another set of speakers and mic's from a friend and the mic's still don't work. I've tried swapping the order, but then nothing works. However, another friend with a 2004 Venture bought after market head sets from the USA that were made for the Honda Goldwing and we plugged them into my bike and the mic's worked okay. I'm totally stumped. Does anyone know if the audio system has a built in blocker to prevent us using after market products not made for these bikes, or what may be causing my problem. Cheers.
-
if you have 1 or 2 cords that need using, pm me with $$ and ship to Tulsa, OK. I have the headsets with mics, just need the cords.
