Search the Community
Showing results for tags 'm/c'.
Found 21 results
-
Hey, does anyone have a ride, rally, or m/c function that is going on in your neck of the woods, or prairie, or hills, or valley in the next couple months ??? I am itching for another ride before this year ends. I am riding down to Bolivia in the beginning of January, but that means I have the rest of October, all of November, and all of December with no rides planned. Whoa is me. So if you have a m/c event in your area, or anywhere west of Timbuktu, Mali (that is in Africa), please send me a PM, and let me know. I need some more miles on these tires on my RSMTD before I take the bike apart for wheel attitude adjusments. Thanks,
-
Anyone know how to get Ebay auctions history for the past 2 years of entire Venture m/c?
-
Using an automotive floor jack (and a block of wood) what is the best location to lift the bike. (for example to change fork bearings) I don't see clear access to the frame & I don't want to crush the exhaust. Can I use the engine pan? I will eventually get a M/C Jack Sorry for all the questions but I don't find any in the search & I figure thre will be something for future VentureRiders!
-
http://news.yahoo.com/blogs/this-could-be-big-abc-news/step-towards-safer-motorcycle-riding-154804126.html
-
Here are the RSTC patches. So far there are 2 orders. If you are also interested please indicate so on this thread with the following info and I'll send you the cost including shipping. Your Name and address. The type M/C or Star or both Sizes 3.5 inch; 5.75 inch; 7 inch; 9 inch; 15.5 inch (these are the width measurements)
-
Has anyone found a Kumho as of late? I am having a hard time locating a 160/80 r15 How do folks like the federal? I can't take the 400-5000 I am getting on an M/C anymore.
-
after reading about "BONGO-BOB'S "misfortune, it became obvious to me that some members here are "savvy" about peripheral neuropathy. my sister has it in both feet, and now her hands are showing signs of "loss of feeling". she is NOT diabetic, and is rapidly becoming a cripple. anyone who knows about this malady, please respond or p.m. me with your input. God bless all. just jt
-
I did not go on the M/C even after rushing to get the parts for it, the weather was to nasty so I took the truck with my 4 legged kids to Alexander Springs ( Ocala National Forest) I bought an old Sears canvas tent from an estate sale years ago for 10$ and never set it up till this week, all the parts were there but took a while to figure out, it was waterproof with all the rain we had. This was my first trip there and it was nice, the water was crystal clear but cold, I will go back again.
-
i have a federal 165/80/15 c/t on back and love it. what size rear m/c would fit the front on my 2gen. all my goldwing riding bubs run rear m/c on there bikes. the front rim size being 16 and back 15? anyone doing this on 2gen.
-
I know that new bearings on big machinery can get a bit hot, sometimes to the point of boiling the grease, until they wear in. Just wondered about smaller ones, like say car or m/c wheel bearings? My guess is they do to some extent & I bet some of you guys will know for sure. Tony.
-
and they are nice. Thanks for the work in getting these done. thanks Don for not putting a road block on these. Lady Massey says i have to get her a jacket to put hers on. I was wondering when she was gonna want some M/C gear! Christmas is jus' around the corner too! while our pins may look like someone else's - they are much different cause they are ours!
-
Quickstep and I had a great day (Sunday) doing the annual Patriots M/C poker run for prostate cancer research. Left at 8am, and got home at 7pm Great to catch up with a lot of people I hadn't seen since the accident (2 1/2 yrs) and to make new friends also. :clap2:A lot of the members are Vietnam Vets, as well as some still serving in the forces. I live in a navy town and have always supported their fund raiser's etc. Great bunch of folk's and they were interested in my "quike" and loved the fact I was still riding.
-
Anyone got one of these? http://www.xm-radio-satellite.com/pdfs/antennas/AWSR-232045MT_detailed_information.pdf
-
I've looked at the Trike forum...reviewed the Darksiders forum...and still have questions... Second Gen RSMV....Tri-Wing Trike 6 degrees of rake (ie E-Z Steer) rides & performs like a dream...last week was 2000+ miles of the Ozarks...bit dodgie in the rain, but was expected...BUT....the front tire (M/C) isn't gonna make it....6000 miles and it's 75% gone..Need opinons or suggestions on conveting to a C/T....
-
The RSV manual states that the size of the rear tire should be 150/90B15 M/C 74H. I'm looking at getting the following: * Front = Avon 150/80-16 71H * Rear = Avon 150/90B-15 M/C 80H 1) What does the M/C stand for? 2) What does the 74H and 80H stand for? 3) Being the manual states 74H and Avon has a 80H, will that be a problem? 4) Avon also has a 74V. What does the "V" stand for? (Which one is better, the "H" or the "V" series?) -
Live near Orlando FL and want to make a M/C Trailer for cheap here is your chance. Hope this helps some one out. Link: http://forums.delphiforums.com/MCTrailertowing/messages/?msg=6904.1 -
hi folks as you know sarah and i volentureed to head up the kids actives for the rally. we have a couple of ideas. snarley bill has asked us to come up with some kind of games that we can use the m/c with the kids. one is a ring toss from a moving m/c. still working on a few others. but i would like some suggestions from everyone. any kids input would help also. i belive were are breaking new ground here. to have some kind of actives in the evening after the rides are over. thanks don c. & sarah
-
Hi- I have an 06 RSTD, trying to install a CB and an intercom. TOO much ignition, alternator and fuel pump noise. How have you solved this problem? Are there any filter kits available or do I need to do it myself? Helmets with J&M headsets are also used with another m/c, radio is Cobra handheld, intercom is Air Rider. -
Just started searching for Avon Venoms for my V Star 1300 and guess what..............Avon doesnt make any for it..............any suggestions............my rear Dunlop only has 7600 miles on it and needs to be replaced. Can I use a different size. This is what is on the bike now.................:doh: Front is a 130/90 16 m/c 67H Rear is a 170/70B 16 m/c 75H
-
Copied from another thread..... Here's my position on shimming Squeeze. If the handle bar masters are going to slip or rotate on the tubing with shims, they would do it without the shim because of improper torqueing. 6mm bolts will give plenty of torque compression to make the masters stationary. The weak point will be the threads in the aluminum body due to over torquing , and that exists, shims or not. I understand what you're talking about in delinking. I hadn't thought about the rear master driving the 2ndGen front caliper. I wonder if it could??? The 2ndGen calipers I have are the 2 piston varity with the floating offside pads. I wonder if it's the right way to go??? Hmmmm.... Got to think about this somemore....
-
i got to go back to work , we are opening a new RV dealership here in Deland dec. 1st , building a new web site setting up the new building , training new people , and lots more , its crazy around here , all of us that work here are riders and the 1st thing we told the our builder we have to have someplace to park our bikes . we figger riding will keep us sane . we will be doing sales , service and rv rentals and this spring we are going to try selling used M/C too ! so if you guys don't here from me for a little while don't worry , i will always be reading here , i will always need my VR.O fix . i am way , way , way , to old for this . wish me luck thom
.thumb.jpg.5bc608c29d230c44c77c79acb0510cd8.jpg){kind=avatar}
