Search the Community
Showing results for tags 'licence'.
-
A basic licence here in BC, Canada costs $75 to renew for 5 years. For old farts like me (65 and over) it is $17 !! whoooop whoooop !! I LIKE being OLD!
-
I am finishing up the electrical wiring for a trailer. The trailer has independent turn signals and all lights are LEDs. I have read many of the threads about hooking up to the bike's electrical and notice almost all talk about tapping into the wiring under the seat. I have an 08 RSV and my question is: has anyone tapped into the harness behind the licence plate? I was going to make 2 into 1 water proof bullet connector adapters so not to have to splice into wires for the bike's female trailer plug. (running, brake, 2 turn signals, then a ground) and if anyone has Pros or Cons as to why one hook up is better or worse / under the seat vs behind the licence plate, it will help me decide. (i wired my gold wing up to the harness behind the rear tail light cluster and never had any issues) Thanks, Shamue
-
An Albertan motorcyclist was caught driving at 263 km/h on Highway 16 between Edson and Hinton, Alta., about 280 km west of Edmonton. When the case went to court, amazingly, the judge allowed the motorcyclist to keep his licence if he paid a $12,000 fine. "The speed was unusual to begin with," said RCMP Sgt. Ron Lyons, pointing out the maximum fine for speeding in the province is $25,000. "But I haven't seen fines that high, ever." Source: CBC News ....and for today's educational tidbit... http://www.differencebetween.net/language/difference-between-licence-and-license/
-
My daughter got her class 6 (motorcycle licence). She has been to dairy queen twice already.
- 7 replies
-
- already.cool10
- dairy
-
(and 3 more)
Tagged with:
-
randy thank's for the licence frame you made for us , it came in the mail today and it looks great. for anyone that bought one you will be glad you did. I had to install it on the bike right after it got here and when i went to the bike shop today i had four people ask where i bought it at. So once again thank you randy for doing this for us. Ed.
-
Just re-newed my licence 2 weeks ago. Item of note: The Old licence, Endorsment says. " All Motorcycles " The New licence, Endorsment says. " All 2 wheel Motorcycles " So, I guess this means if I add a SideCar, or get a 3 wheel rig, I have to get Re-Licenced --- Hmmmm ???? I will have to look into this, just out of curiosity.
- 16 replies
-
- endorsment
- licence
-
(and 3 more)
Tagged with:
-
Was at the dealers last week and got to talking to an older gentleman, 55, about his scoot. He had it there for a licence certification for about 3 weeks and it seemed that it could go a little longer. He was getting impatient. He's a bit like me, only got his licence for 2 years, bought an older scoot and now wants to ride. Trouble was, his front forks were leaking bad and needed to be repaired, but he was afraid to do it himself because he hadn't done it before. Well I don't have that hang-up, if I haven't done it before now is the first time then. So, to keep this story shorter he called me on Tuesday and asked if my shop would be available and if I could stand by while he did the work. Seeing as the Wizard765's bike is all fixed and gone, I got room, so it's here. It's a 1980 GL 1100, in need of some tender loving care and maybe some upgrades to chrome from rust, but basically it's looks like a lot of elbow grease. He started by pulling off the forks and then I cleaned a little piece on the lower tubes. Well they look like brand new now. Course you just can't stop there, so you call in the troops. We should have this scoot on the road next week after the parts all arrive, new seals, springs, oil, ,,,,,, and oh ja ,,,,,,,tires!!!!!!!! Believe it or not, the front tire was a vintage for sure, manufactured by Dunlop 1973, and the rear was a lot newer,, 1990. He plans on making this a winter project and it should look real nice by next spring.
-
What a guy ...Took time of his busy schedule and got me a Chrome licence plate Thanks again