Search the Community
Showing results for tags 'intensity'.
Found 3 results
-
The 5 wire to 4 wire adapter that I installed has been working fine with the H/F LED light kit I put on the H/F tag along, earlier this year. This week end I added red LEDs high on the rear of the trailer for additional tail/turn/brake lights. I also added red and amber LEDs on the corners. They are hooked up with the tail light circuit and work fine. My problem is with the brake/turn circuit. The new red tail/brake/turn LEDs are wired in parallel to the original tail lights. When I turn the ignition on, the low intensity for the original tail lights and the new addition tail lights come on low intensity as they should. If I press either brake pedal, the existing tail lights go to high intensity and the new ones do to. If I turn on either turn signal the proper original turn signal blinks as it is suppose to, but the "added" light does not. If while the turn signal is blinking I press either brake, both original brake lights go to high intensity and the blinking stops, although there is a slight intensity oscillation in both sides. The converter I have is not a "Hoppy" brand. I'm wonder if The additional LEDs have exceeded the capacity of the adapter? I got this one at Ace Hardware. Where have any of you found a "Hoppy"? I need to get this fixed BEFORE Thursday, as that is when we need to head out for Vogel. And if this wasn't enough, while changing the oil this afternoon I noticed an oil drop on the bottom of the rear shock!!!
-
I plan to install the 15" light bar on the rear of the bike this winter. This site has some good instructions on how to do this and several good sites to buy from. I see the lights have high and low intensity - so they are wired for driving lights as well as brake lights. I thought during my web searches that there was light bar that also did turn signals? The entire light bar goes high intensity for the brake The left side of the light bar flashes on a left turn and the right sides stay intense The entire bar stays at low intensity while driving Is it possible to buy a light bar that can offer driving, brake and turn signal features?
-
I have a 2006 RSTD which is at home and I am at the beach.I want to purchase some Genisis led turn signals but do not know which base will work.Wiithout the bike I cannot take out the bulb. 1157 replaces all 1157, 1154, 1034, 2057, 2357, 2397, 3496, and 7528 bulbs http://www.customdynamics.com/_themes/neon/neoarule.gif http://www.customdynamics.com/Images/baz15d.jpg Dual Intensity Offset Pins - 7225 ( Used on Most New Yamaha, Honda, and Suzuki Rear Turn Signals) http://www.customdynamics.com/Images/bau15s.jpg Single Intensity Offset Pins - 7507 http://www.customdynamics.com/_themes/neon/neoarule.gifor
