Search the Community
Showing results for tags 'fat lady kit'.
Found 1 result
-
After some thinking and trial and error I finaly figured out how to move the trunk up and back on the MK2 like I did on the MK1 bikes. I will get Mini to post the pics of my scoot with the trunk in the factory position and the moved position. I unfortunatly cant make the parts at work do to the policies of my current place of employment but I can give you the plans for them as I have made them so anyone that wants can make there own. here it goes you will need 4 1 inch wide by 3 1/2 inch strips of metal I used 301 1/4 hard Stainless .072 thick but am going to remake them out of .100 for rigidity and for the other 2 you will need 1 3/4 by 3 1/4 pieces. I will enclose I bent all of the pieces to form a Z with one end longer then the other so measure from one end one inch,and flip the metal mark it at two inches so you will have a Z the Z should measure one inch flat one inch riser and one and 1/2 on the one inch wide peices and one and 1/4 on the 1 3/4 inch wide pieces. Drill 1/4 inch holes to use the original fasteners and use grade 8 or better bolts to attach the trunk to the long end of the brackets. After Mini gets all of the pics resized she will post them on this thread. Good luck and I hope you have the same success I did with the relocation. as Mini thinks this will help make her more comfy going down the road. Jeff