Search the Community
Showing results for tags 'decrease'.
Found 3 results
-
Looks like we're gonna have to head west Thursday instead of our eastern trip we had planned due to hurricane Isaac. The question I have is, how much performance decrease should I expect once we get into the mountains in Colorado, NM, Ut, and Ariz? We have been all over the Smoky's and Blue Ridges with the 6000ft peaks, and really didn't notice a decrease, however, I hear out west with the additional altitudes, and dryer air, there might be an issue. Like to know what to expect so I won't think there is something wrong with my ride. Thanks -
Now... I've got the parts I should replace (courtesy of Venturers tech page... hehe..) but I noticed a step I cannot do. On my YVR 90 I cannot seem to--with the CLASS control panel) reduce PSI to 0--of course on manual. It will at best decrease to 6, and even then the system pumps a extra psi in. Their another manual way? Or is it because I'm not really off the ground on the center stand? -
OK, I've gone through the whole system. I was getting an E1 & E4 error. I've soldered the connections in the control unit, traced every wire for continuity, relay test was done, was able to get the pump to spin independently, but still, the system won;t work! It reads the psi, but when I press to increase or decrease, I hear the relay and the solenoid click but nothing happens. I've gone through every step in the service manual. What next? Does this mean that the control unit is faulty? At some point during this exercise, I was able to decrease the pressure using the CLASS unit, but had to manually inflate.... What's next?
