Search the Community
Showing results for tags 'clunking'.
-
Well, I've noticed the front end on my bike has been clunking while going over bumps for a bit now. I attributed it to loose neck bearings, and was partially right because it had a washy feeling as well. Took the top bearing out and it was loose as anything, the rollers would sit inside the cage, not good. So I installed a new top bearing and just left the bottom bearing on the steer shaft because it felt and looked good, just lubed it up real well and slid the whole assembly back on. It tightened up my steering nicely but still have the noise. With me off the bike, and the full 17psi in the front forks, if I hold the front brake in and push the front of the bike down when the shocks reach a certain point is when I hear the clunking. I guess it's time to pull the shocks? To be sure it wasn't the bottom bearing I had the bike jacked up and moved pulled on both shocks at the same time, not loose at all, could probably stand to be re-torqued since I installed the new top bearing. I wanted to do the progressive upgrade anyway so I guess now is the time. Any insight? Thanks.