RSV - BakerBuilt Air Wings installed?

Anyone with the Baker Built Air wings installed have a GOOD, clear picture of the finished installation?

The instructions showing a diagram of the fnished installation is about 2" x 2"...so it looks like a black "blob". I can't make out much detail...even with my "readers" on!

Anyone?

added to my TO DO LIST.... check back later for Picture...............

added to my TO DO LIST.... check back later for Picture...............

Not sure if GOOD or CLEAR enough but its free Note I have seen these mounted several ways and each person had a good reason for mounting them the way they did. Mine are this way because I'm 5' 8" and have low mounted foot pegs which holds most of my foot but my heal is still on floorboard (very comfy for me). So with being said here are my Pics:

http://i90.photobucket.com/albums/k249/frogmaster_2006/DSC01456.jpg

http://i90.photobucket.com/albums/k249/frogmaster_2006/DSC01455.jpg

http://i90.photobucket.com/albums/k249/frogmaster_2006/DSC01454.jpg

http://i90.photobucket.com/albums/k249/frogmaster_2006/DSC01453.jpg

http://i90.photobucket.com/albums/k249/frogmaster_2006/DSC01452.jpg

http://i90.photobucket.com/albums/k249/frogmaster_2006/DSC01451.jpg

http://i90.photobucket.com/albums/k249/frogmaster_2006/DSC01450.jpg

Good Luck

These are BOTH GOOD and CLEAR!

I got the information I needed. I also have highway pegs mounted down a little lower on the crash bar as well.

Thanks...these are exactly what I needed!

Walt