Jump to content

Snaggletooth

Supporting Member
 View Profile  See their activity

  • Posts

    4,545

  • Joined

  • Last visited

 Content Type 

Everything posted by Snaggletooth

  1. Snaggletooth
    Been at the drawing board again. There always seems to be one more lil improvement that can be done. This lil creation takes care of two, maybe three things that I wanted to take care of. So not much fun in just saying what it so I'll just post a few pics and let ya guess. It's in raw condition now waiting for the epoxy to dry and will be ready for the final sanding and a few coats of paint and clear coat over the next couple of days. When it's done and mounted I'll post the finshed project. So have at it. Mike
  2. Snaggletooth
    Okey Dokey.
  3. Snaggletooth
    If you look at the inside of the plug you will see a yellow band around the center section that houses the pins. If you take a pick you can slide that out and away from the center section. It appears that the yellow band is a sort of locking device along with the internal spring clips to help retain the pins in place. Once that is removed the pins can be pulled back out rather easily. Worked for me anyway. Remember to put it back in when you got it right. LOL! When I did mine I did not crimp the clamps on the pins tight enough over the wire and them over soldered them. I could not get the pins to go in far enough to seat properly to lock in. They would pull right back out. Once I removed the solder and recrimped and resoldered them they snapped right into place and locked in. Had mine in and out a few times. This Shindengen unit is one of the best mods I have done to the bikes electrcial system. An absolutley rock solid charge all the time. Mike
  4. Snaggletooth
    I'd be interested in a reconditioned deck myself along with a tuner control. Let me know your game plan. Mike
  5. Snaggletooth
    Looks repairable from the pics Jeff. If you're interesting in taking me up on my offer let me know what size sheets you would need. Mike
  6. Snaggletooth
    Check with skydoc_17 or e-mail Rick at Buckeye Performance info@buckeyeperformance.com for his price. Got mine from Buckeye about 3 years ago and I think they were about $75.00. Mention you are a member here for a discount also.
  7. Snaggletooth
    I've seen this type of comment before on the clutch upgrades. His reference to the 11 o'clock and 5 o'clock positions were in reference to where the marks were in the picture. Your marks could be in any position depending on where the basket stopped moving at. Once you find the markings and place everthing back to line up that should help. Also...did you soak the new friction disk in oil to allow it to absorb oil? A dry disk can grab a bit to.
  8. Snaggletooth
    Gary, Got to follow this one. I have a set of Blue's I picked up as the train of thought in past posts seemed to be they were the best for our application. Curious about the covers myself. Mine came without and can't seem to find any. You thinking Brembos? Go radial! Six would be a bit extreme don't ya think or you concidering doing some stunting?
  9. Snaggletooth
    What's that old saying? "Every motorcyle is about $2,000 away from being finished."
  10. Snaggletooth
    As long as your're in there........... Have you done the heavier gauge battey cables? And then how's your starter engage clutch? And have you upgraded to a higher output stator? And do you have the Progressive springs in yet? And how's your R/R holding up? And a good time to change the thermostat!! Fork seals? Brake pads? Head light upgrade? Ahh dang! He's going to throw stuff at me!! Once it gets rolling..........
  11. Snaggletooth
    Jeff, sent ya a PM on an idea. Mike
  12. Snaggletooth
    And a handy tool it is!! Installed new All Balls in the neck while I had the forks off and it made setting the new bearings a snap. Had some wobble last year and it's gone now. Congrats on the new to you bike. It just gets better as it goes. As stated clear out all the gas that has been Sea Foamed and that vapor might just clear up. The NAPA thermo works fine. I've had one in mine for a few years now and it runs at just about the same temps as the OEM. As long as you're digging in that area take a few minute and put in a new o-ring in the drain valve. If it's not leaking now....it will. Skydoc_17 has a kit listed in the classified for a few bucks. Works fine. Enjoy the bike. Mike
  13. Snaggletooth
    '84 MKI here alive and well.
  14. Snaggletooth
    Boy, ya got that right. Found out the hard way. I had one really bright blue LED as an indicator light in a switch on the bars. Noticed my night vision was not working well at all. I knew the light was a distraction and ended up taping it over one night. Snap! Night vision was all better. Little research comfirmed blue light can be a issue.
  15. Snaggletooth
    He's got it. If ya go to NAPA the part# for the Maxi fuse is 7822101. They will be hanging in fuse section. Don't forget a spare!! The part# for the Maxi holder is 784674. These are not on the fuse rack at all. I found them hanging on the spinner rack with the wire and butt connectors. When I had asked the parts guy for a Maxi fuse holder they tried to sell me a fuse block the size of my hand for $20.00. Check the rack. LOL! Mike
  16. Snaggletooth
    You would think he could afford a nice trailer and save a lot of hassle. But if ya got the bucks..............
  17. Snaggletooth
    If you are talking about the clear plastic block that runs from the the battery, that is the main fuse. It is actually not much more than a metal blade. I did mine by simply cutting out the plastic block and replacing it with a MAX fuse holder and a 30 amp MAX blade fuse. Simple to do, not expensive at all. About $5.00 for the holder and $3.00 for the fuse. And a lot easier to change than the OEM fuse. And the fuses are easier to find. Got mine at NAPA Mike
  18. Snaggletooth
    Hey Marcarl, Ya just had to tease didn't ya. You have any idea long long I looked for a set of those lightbars? I found one and it was a rusted mess. Look good though. Mike
  19. Snaggletooth
    And that was back in the day when waxing the car was an all day job. Those old road cruisers seemed to be about the same size as an aircraft carrier when you started waxing. Bike would be much easier. Yep.
  20. Snaggletooth
    The picture looks like it would work fine. Just remember to cross your safety chains under the hitch so if you would have a break-a-way the ball hitch will drop into the cradle. I've seen a couple riders that ran their chains so tight I don't know how they could turn. Not good.
  21. Snaggletooth
    Ok, ya looked. I figured the way you guys follow Beavers advantures you'd jump all over that header. But.....I was digging in a couple of those old boxes that seem to follow you around for years that contain things that you keep for no reason and I did find something that I used to love but is was lost track of for years, actually decades and I like to find it again. It took me a while to figure out what is was but when I did I started jonesing for more. Many moons ago, like in the mid 70's I was at a car show and ran across a different kind of car wax. It came in a plastic tub and was in a powder form. You would take a damp cloth and dip it in the powder and apply it like a paste. The thing was that it did not let water bead up like a regular wax. After you finished applying it you could throw a bucket of water on the car and it would simply run off in a sheet. Not a spot to be seen. The effect was rather interesting when I would use RainX on the window also. People used to stop and look at the car when it was raining out because it looked like it was dry. You could see the rain drops hit and splash but then.....nothing. No beaded water, no spots and when it dried there were no water marks. Sadly the tub is now so worn and faded I can read nothing on it. What powder is left is a solid, hard as nails chunk. Maybe if I throw it in the blender.....? Sure would like to find out if it is still available. Only time I ever saw it for sale was at the car show. Never in a store, car mags or even offered on TV! But that was way before those fantastic infomercials were there to guide in our purchases. Anybody ran across a product like this? As the kind of guy that would rather ride the bike than clean it..........see where I'm going with this........it would be great for bike. Mike
  22. Snaggletooth
    Now that is nice work Snarley. Very slick!
  23. Snaggletooth
    Dang!! Finally found a use for my Groucho Glasses!
  24. Snaggletooth
    Squidley, I've been so far out of the box for so long with this bike I don't even know where the box is anymore. The other plus side of this is with the heavier lights the brackets tend to droop a bit with the little bit of play that exists between the tab on the frame bracket the alignment slot in your brackets. With the braces I able to add a lil up pressure to the light and keep them level. Works out well. Rather that the beams being a few degrees off level they are closer to straight across. I'm really starting to think that all you need in the tool box for these bikes is a big hammer, an anvil and a drill. Well....sometimes.
  25. Snaggletooth
    I'll go with "retro". I'm afraid that in a few more years it might be closer to "Steamship Punk". LOL! I got to looking into the DS lights again after installing the Shindengen R/R last week. Man that lil bugger works well. The other driving lights I was running were 65 watts each and the charge only dropped 2/10th of a volt when I kicked them on. With these lights, 35 watts each it only drops 1/10th. With the Hella H9 setup for the headlight I have all the down the road light I need. These will give me more spread and won't be so intense for oncoming traffic.
×
×
  • Create New...