Black wing

i rewired it for the single pickup, and loaded the proper program. the only way i could make it fire was to move the firing order all down a position. ide love to try using one that is working proper, but there is no one out here with one

T1d14-94 c 3jj-11 1820

well ive repaired the stock computer but still no luck with the ignitech

nope its all proper, i tried setting it up last summer. stock computer worked perfect, ignitech would only fire on 3 and even then i had to move the firing order ahead by one just to get that. i think the pickup coil may be to far out of spec and is screwing it up but i just dont know for sure

oh i did, set everything right. but for some reason i can only get 3 out of 4 cylinders to fire with it

so my tci in my 1991 VR just gave up the ghost and is totally fried, the one i pulled out is marked as 3JJ-11, the only ones i can find are marked as 3JJ-00. i've got an ignitech V80 but it refuses to work on this bike even though the plugs have been configured for the single pick up. any one know if the 3JJ-00 will work? or if there is a way to get the v80 working properly?

i would be pulling all the lines and replacing the o-rings in the fittings, if they crack you will lose air that way. if you find your solenoids are shot let me know ive got a pile of them here.

yeah pretty sure its just rotating an orifice plate.

if you think its actually ignition in the case have you run a pressure test on the cylinders? the only think that could cause that is a blown piston or ring.

yup sounds sounds like your crank case vent is plugged up.

radiators really aren't a big concern as long as its well protected. my number one for a bug out would be the ural patrol. followed by a triumph tiger or honda africa twin though even the first gen venture is still a great option, ive run mine into the woods to go camping, through torrential rain, snow storms, ive even crashed one real good and its always gotten me home and run like a champ the whole way. good on gas and still fast enough to out pace most others who may want to chase.

neat design but looks like a chore to ride

sounds like you may have over filled it a bit. ive found if these bikes are filled over the half way line they get super cranky

good on them, but im stoked to hear the 491 are back i missed then dearly lol

i am in the planning phase of building the vmax mod for my first gen and am trying to get to designing the exhaust system, but i cant really begin until i can figure out the real flow i am going to be dealing with. any one here know the numbers for the stock venture 1300 motor and the vmax? or able to teach me how to properly calculate it so i can get some accurate numbers for the expected outcome of the mods.