Jump to content

pmelah

Expired Membership
 View Profile  See their activity

  • Posts

    1,499

  • Joined

  • Last visited

 Content Type 

Everything posted by pmelah

  1. pmelah
    it doubles as a crash bar hence the price:whistling::rotf:
  2. pmelah
    them 2nd genners are just jealous they didn't get the answer in time just shows how fast a 1st genner really are # 1 post question # 2 post 1st genner answer # 6 post 1st genner with part # and where to get it :whistling: :rotf::rotf: i love my 1st GEN and VR.org
  3. pmelah
    im more inclined to believe a blown head gasket as the culprit could be when the PO put a new cap on the pressure found the weak spot on the head gasket just a thought i know this happened to one of our company vehicles
  4. pmelah
    Good question ive got quite a few that look like the one on the left in your pic and need to replace them im thinking about getting the kit that lets you make them youself seen it on american restoration once
  5. pmelah
    Mine sounds like its getting to much air and not enough gas with just the false cover on it sounds like I dont know how to describe it but the carbs seem to run better after spaying seafoam in it it didnt smoke as bad as I thought it would
  6. pmelah
    Do the venture run bad with the airbox off all my slides are working good since I put fresh gas in it and sprayed seafoam in the carbs I have a little popping from the carbs due to not being synced
  7. pmelah
    red do you have the part # on that from ricks
  8. pmelah
    Red I got a can of the spray sitting on the shelf I was going to use on the suburban now I will use it on the venture instead
  9. pmelah
    Thanks Orlin thats what I was thinking it may be quicker to take the slides out and clean them up. George I ran it hard last night and this morning and no change but that is just fresh gas only im getting a can of fresh ethanol free gas today to run through after this tank mixed with sea foam. I got a set of cheap ngk plugs to run in it for now so I dont foul out the good iridium plugs I have to put in it 10.00 for cheap plugs is easier to throw away than 36.00 for good plugs.
  10. pmelah
    are you sure that's what you think it is could the PO have put something in not knowing :confused24: looks like an Egyptian necklace:rotf:
  11. pmelah
    OK i let the bike set up for well since Isaac came through i put some unknowingly bad gas in the tank from a gas can i filled up before the pending visit of Isaac i must have gotten the bottom of the tank i ran some berry mans treatment cleaner in my tank the whole can in the 4 gal. of gas it was running bad lose of power before i got back to the shop that's when i added berry mans and ran it for about 30 min. then shut it down that was Friday i just cranked it and it was still running bad so i drained the tank at the fuel filter the gas was dark yellow like old gas hooked the line back to the pump and cranked it. it was still slow response on throttle all 4 cylinders are firing so i took the air box apart looked in all 4 carbs are spraying gas but slides were not moving i assisted them by moving them with a screwdriver now i have only one not moving on its own could it be the diaphragm any suggestions would be greatly appreciated before i take cover off carb diaphragm and tank has fresh gas the crappy ethanol gas
  12. pmelah
    i have no idea wish i could answer your question but i am curious to the answer as you are i do like learning new things here
  13. pmelah
    good job Brian heal up fast
  14. pmelah
    i just laid down on the couch after a long 12 hr. shift at dupont and could not go to sleep after that my eyes were glued to the tv wishing i could help
  15. pmelah
    i look forward to hearing him complain about the M/C tire as for the mileage dif. and handling
  16. pmelah
    its a shame people do bad things i bought my bike from 1rooster in NC towed it home on the trailer went to the county tag office on Tuesday after getting home Monday night transfer d the title and got my tag did not have a bill of sale just the title (i got a friend at the tag office) received my new MS title on my 1st gen 2 weeks ago next week i go back to the tag office and apply for antique tag for it with out of state titles MS usually wants a bill of sale to go with it but MS is not a bill of sale state this depends on the county your in and is to protect the PO
  17. pmelah
    nice:cool10:
  18. pmelah
    whats the amperage pull for these lights that may make a difference not sure but someone else will chime in about that. i was thinking of doing the same thing so i will be following this thread
  19. pmelah
    im with buddyrich what he said whats snow :confused24: :rotf:
  20. pmelah
    Bongobob I cant find where I thanked you for the switch so im posting now thank you for the switch. it works great and thanks to dingy for his write up on cleaning the switch the besrt 12 dollars ive spent in years
  21. pmelah
    Hey venturebob if you look at the bottom of the housing and lever you will see a hole big enough to put a small screwdriver in it push it in and the housing can be pulled out
  22. pmelah

    I Quit!!!

    pmelah replied to bongobobny's topic in Watering Hole

    congrats bob enjoy the perm. vaca:bighug::cool10:
  23. pmelah
    I think I only have the 99 rstd listed and I have made this mistake before needing answer for the 84 venture but I did post in 1st gen sec. that I had right:whistling:
  24. pmelah
    Very wise people on this site can not read minds even though we we like them too and have the quick fix answer before we post put what you have at the begining if you have more than one bike
  25. pmelah
    hey no one said any thing about an extra bottle of blinker fluid
×
×
  • Create New...