Jump to content

Bill Feehan

Expired Membership
 View Profile  See their activity

  • Posts

    12

  • Joined

  • Last visited

 Content Type 

Everything posted by Bill Feehan

  1. Bill Feehan
    I will give that a try because there is no power past the battery. thanks
  2. Bill Feehan
    I checked all those areas , I still need to check the terminals , I get no power past the battery. Bill
  3. Bill Feehan
    I haven't started my bike, 1300 Venture standard, for several weeks. It has been on a battery tender all that time . I went to turn it on and Nothing. The battery charger shows the battery as charged, but I get no current. Any Ideas. Bill
  4. Bill Feehan
    I got out of work last night , and much to my dismay , my dash and headlights were not working. I did have my newly in stalled driving lights so I was able to limp home. The driving lights were not exactly adjusted right but I did get to see the tops of all the trees on the way home. This morning I checked the fuses and not being too electrial inclined ,I decided to check our website before I did any major damage to my bike. Sure enough, the first forum on 1st Gen light problems suggested WD-40 in the ignition switch. I tried it an now have my headlights and dash lights back This is the best website I use , and the members are the best at helping others and sharing their knowledge.
  5. Bill Feehan
    Thanks for all the suggestions. I think I will look into the Harley Road King Mufflers, I think it will be the least expensive option. Bill
  6. Bill Feehan
    I was refering to the ones beneath the bags,
  7. Bill Feehan
    While do my spring fix on my 87 VR standard I noticed that the muffler near the tail pipe does not look long for the world. Anyone know where I can get a replavement..
  8. Bill Feehan
    Thanks that was what I was trying to find out. I have been running Dunlaps 491 Elite but the price here in Michigan is getting outrageous. I have seen the tires on line and hope to locate a pair at a resonable price. Bill
  9. Bill Feehan
    I would like to know if anyone has has used Avon Venoms on a 1st Gen bike or are they just for 2nd Gen Bill
  10. Bill Feehan
    Has anyone used these tires on a first Gen , and what were the results. Bill
  11. Bill Feehan
    Thanks for the information,I will be looking for a new mechcanic to complete the job Bill:bobby:
  12. Bill Feehan
    I have replaced the seals in the front forks for the last three years on my 1987 Venture standard, I went out this morning and found that the left seal had leaked again. I took it up to the mechcanic that did the work on it last year and he can't figure it out either. He said the bushings were good last year when he replaced the seals. He said he used the seals Yamaha reccomended( K&S I beleive). I am stumped any one have this type of problems , I sure could use some help.
×
×
  • Create New...