dacheedah

all good. Is anyone using edsets ? J&M elite vs the standard audio quality?? Other headsets???? I'm thinking I like corded

check on the price of deck boards usually 1 1/4" thick. I would not use plywood for durability reasons. Have you looked at diamond plate decking??

nice, all I can say is Very Nice!!

wishing you the best, thoughts and prayers

Need a bigger trailer maybe

Exploring headset options, we listen to pandora use gps on iphone connected to isimple and use the cb but wife would like to be able to take or make a call on cell also. We would be replacing old j&m headsets. Would like your opinions and ideas for setup.

Try Earl "skydoc" he is very knowledgable about carbs

enjoy the ride

stay diligent and stay safe. We appreciate your service and know that you are in our prayers for a safe return.

Tail light uses butt connectors, make up a y harness and unplug stock and plug these in between the connections

Yamaha used to make it but I haven't seen it in a while. The 10w-30 or 20w-50 pretty much cover the operating temperature you will be in.

Don't let Tom hear you say the S n o w word

I just added a longer tail to it, I added mine to the inside facing me, loosen the windshield and slide it in. You will need to cut slots in for the screws and the center where the bar is. No drill or frills

Yep, my bad, squelch is what I meant

Joe, did he say to use "old" oil in a first gen??

Ok boys, and gals, pull up your rockin chairs. I use the yamalube ( mostly because i'm still under warranty ) manual suggests 10w30 for cold weather, 20w50 for hot weather. Most dino is ok as long as no friction modifiers No matter what oil you choose replace the crush washer (214-11198-01-00) and torque to 31 ft lbs

If you do your PM's you will find it is very reliable. Learning to do the pm's is not difficult and you will have the satisfaction that it is done correctly. If you are not sure about something, someone with experience is just a meet away.

R u going to the international??

Congrats, thats awesome

The cb antenna has the tuning coil on it. Biggest thing is turn down the swr if you are farther away, who u r calling must also do the same.

Ethanol does not burn efficiently, the more the lower the fuel economy. It depends on what blends your politicians want them to run

on kickstand is ok, if you check your manual the schedule is in it. Probably every other oil change

OK, I talked to the Motorola tech at work and he suggested I put some FERRITE SNAP SLEEVES over the power supply wires. I bought a pack of 5 of these, they were cheap, and put them on the supply power and ground by the ballast and on the supply line yo headlights. I also relocated my ground to the wire feeding the HID's to battery. Now we tested these on a long group ride and all I can say is they completely stopped my CB from breaking squelch.

Jeff, we run marine battery isolators on all of our boats, charges both but won't allow one to discharge the other. So one starts and the others run accessories . . . A small set of cables or a battery switch will allow you to start from either. http://bluewatermarinesvc.com/html/bat_isolator.html

You can get a kit to replace them http://www.newrivercyclesalvage.com/sight-glass.html