dacheedah

you need the weight off the tire, then check it

make sure it's not from the breather drains, a slightly overfilled motor will vent to airbox and drain down there.

congrats

2nd that, the smart engineers spend a lot of time finding out what works and what fails, now some guy selling tires thinks hes smarter because he sells them. They do agree you will have better traction and evidence shows that your tires will wear much faster. I'll take a pass

http://www.venturerider.org/forum/showthread.php?t=76813 stock are shaped like a dogbone, black and thin in the middle.

The yamaha parts site shows the updated plug is DPR7EA-9, a cold plug may cause carbon fouling. Personally I would have them exchange them.

All the isolators I see are 5 to 4 flat, you could run relays or just wire it to 4 flat. This is a flynfool question. . . http://www.electricalconnection.com/wire-harnesses/hrns-trailer.htm is a 5 to 4 http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_taillight-isolator-hopkins_17010149-p hopkins 5 to 4 http://www.hopkinstowingsolutions.com/products/vehicle-wiring-connectors/power-taillight-converters/short_proof_power_converter.html 5 to 4

You don't need to remove the isimple, you do need to unplug or remove your ipod. That is all!!! and yes it will draw it down in in about 4-5 days. I ran my plug out of the bag, and in between the seats for my wife. I put a leather fanny pack on the back of my back rest and the cable sits there. We hook it to our iphones and play pandora from there and use the gps and it works awesome. You can buy a second cord if you want and run it to the front bars, 2 out ports on the isimple. If you have an iphone 5 you can get a 30 pin to lightning adapter and I put heat shrink on it, works awesome.

How do you plug ito the bike's stock audio system?

Happy Burff day

And then ????????????????

Did you put any LED's on that car??

If they did a clean drill on the outside, you can get some metal tabs and set in. The popping sounds like an air leak where the mufflers connect or it's running rich. You can also look for RK take offs without cats that are not drilled, just have to make an adapter for the back.

anything green cleaned up , dielectric grease especially around the outside of the boots and two white connectors

Just take her for a ride on a second gen

I think thats the doma hickey thingie, don't remember seeing it anywhere

did you change plugs too. Check your power and ground connections and make sure they are tight, clean and away from other wires.

lube your speedo cable and see if that stops it. Failing to do this will cause speedo cable to fail.

Never shelter under a tree during a storm, glad you are ok. The bike is awesome and will serve you well

I would look at the junction box where the cruise is, make sure the cable ends are ok

new regulator, bad one will fry your stator

Take care and follow doctors directions, getting older sucks, have a good ride

looks great

Sad you r headed home, will be glad to see ya come back. Always fun to follow you. Ride Safe