Jump to content

reddevilmedic

Expired Membership
 View Profile  See their activity

  • Posts

    1,183

  • Joined

  • Last visited

 Content Type 

Everything posted by reddevilmedic

  1. reddevilmedic
    two of them at almost 3v, and one at 2v. wheres the crying smiley......
  2. reddevilmedic
    right! i checked the wires at the point right after the solder joint between the stator and r/r. on the r/r side.
  3. reddevilmedic
    no! the needle barely moves. i switched to 10ac just to see, its only measuring 2.5v!!!
  4. reddevilmedic
    crap!! im only getting about 2.5v!!!!!!
  5. reddevilmedic
    ya, the meter says to add 14db when the selector switch is set to 50 ac volts. heres a pic. the needle went 2 hash marks. so if i add 14 to that, it should give me 16v on each wire...i think...thats what im asking...
  6. reddevilmedic
    where did everybody go?????
  7. reddevilmedic
    ok. waiting for others to respond. if no one does...wanna ride together? im near traverse.
  8. reddevilmedic
    ok so it says to add "14" db at 50acv. that would give me 16 at each wire....sound right?
  9. reddevilmedic
    ok. i will go do that now. just noticed the hazard switch came loose. i have turn signals again. but still, low volts. going to go stab away~!
  10. reddevilmedic
    so i stab one yellow wire with red lead? what do i do with black lead?
  11. reddevilmedic
    i backprobed a couple things on left side. fuel pump..fine..that black cylindrical thing..fine. not sure what else to check.or how. why dont turn signals work?
  12. reddevilmedic
    which connections? remember, i soldered everthing together on the r/r and stator.
  13. reddevilmedic
    btw...before i went and got multimeter, it wouldnt start. i put batt on charger while i was gon, 2amp trickle, for about 90 min. then it started. not sure if this means anything....
  14. reddevilmedic
    how?
  15. reddevilmedic
    no.
  16. reddevilmedic
    main fuse good, checked and greased connection.
  17. reddevilmedic
    i checked everything on left side of bike. looks good, i hardwired r/r and stator when i did it. checked all connections. everything at fuse block looks good. checked ground on rt side again, looks good. btw...still no turn signals.
  18. reddevilmedic
    ignition off...12v, ignition on..about 11.8, running @2200rpm..12v.
  19. reddevilmedic
    ok, i got one. i have NO IDEA how to use it. heres a pic, what do i set it on?? im going outside to re-install batt then come back. thx
  20. reddevilmedic
    i will go buy one right now. take me about an hour. just to let you know, new stator, r/r about 3 months ago. skydocs kit.
  21. reddevilmedic
    i dont have a voltage meter. i pulled the battery(agm) to charge on float. i needed to replace starter relay anyhow. like i said, this was sudden. all systems checked before i left. rode it yesterday with no issues. i had turns signals for about an hour, then they quit working, and voltage began to drop rapidly...to about 8 volts..according to dash. got it home, put in garage, shut it off to cool...then no start. i checked ground, looks good. all fuses are intact (upgraded box).
  22. reddevilmedic
    was riding, lost turn signals. sudden drop in voltage, limped home. now it want start. help!! i heard about some relay......is this it? where is it? whats the part number? who has one??
  23. reddevilmedic
    how many MI riders going to Freebirds on June 2? we should meet up! safety in numbers!!!
  24. reddevilmedic
    is it a dirt floor? are you leaving it that way? what size is it? tell me everything...i want one!
  25. reddevilmedic
    Skydocs. where he could turn them into....
×
×
  • Create New...