GothicJB

... and we lit it!https://vimeo.com/164788475 Sent from my iPhone using Tapatalk

This was with the old fire pit 3'x5' new one is 4'x8' and after burning a while. We threw 6 bundles in and burned the rest of those in one night. http://uploads.tapatalk-cdn.com/20160430/f8380c2b257989528291c3db424ef041.jpg Sent from my iPhone using Tapatalk

You're only supposed to use half a cup? Normally we soak it in about 2 gallons and throw a flare! (Not kidding) lol Sent from my iPhone using Tapatalk

Just wanted to share our new fire pit! Tonight will be our first burn on it. http://uploads.tapatalk-cdn.com/20160430/bfaf391152d940bc193cf18ed97168b7.jpghttp://uploads.tapatalk-cdn.com/20160430/4f15d00d7fab4394b12fb1dc24d0aea1.jpg Sent from my iPhone using Tapatalk

Spoken for. Thanks everone Sent from my iPhone using Tapatalk

Found this cleaning the garage off my '83 if anyone needs it pm me your address and I'll drop it in the mail. http://uploads.tapatalk-cdn.com/20160423/045e44b906a710eb2abc6857a5533c37.jpg The red around it is just plastidip and peels right off. Sent from my iPhone using Tapatalk

Unfortunately... no just didn't seem to be enough interest and then I sold my VR

I know it will sound like "snake oil" but seriously look into Rick Simpson oil, RSO and watch run from the cure (1 and or 2). I personally have seen success with two people and you can find testimonials all over YouTube. I'm sure it's not a magic bullet for everyone but I know I'd be on a plane to a legal state without a second thought if I was diagnosed.

I'd have to agree with this. I didn't actually switch to ecigs to "quit" I did it to cut down since smokes went up to almost $8 a pack. Just turns out that once I found a flavor that worked it just happened that I rarely smoked regular smokes. In fact I still occasionally do. Most truthful point of the above comment though is if you want to quit then quit. If you don't WANT to quit, then it's gonna be rough.

It took me about 5 or 6 tries to switch from regular to ecigs ... my biggest problem was that i didn't want some fruity candy chocolatey flavor. I wanted something that still tasted like a damn cigarette. I spent about 4 months mixing my own juice until I found a few flavors I liked and even one that I found pretty damn close to the real thing (i normally smoke Camel 99's). After that the rest was easy. Then in order to lower my nicotine, I switch so a "sub-ohm" unit, which puts out more "vapor / cloud" per pull and switched from 12mg nicotine down to 3. You get more nicotine per pull with sub-ohm, but not 4 times more. The added FEEL of the drag with the thicker vapor was just enough for me to feel like i was smoking something even as the nicotine lessened. I've guided a couple people through the process then they switch to 1mg then to 0mg nicotine and at that point their "habit" is harmless. Feel free to ask me any questions and I'll try to help out as I can. JB

Bought an '01 V Star Classic 1100 this summer and hated the thought of the old reliable venture royale deluxe just sitting in the garage so I said good bye and traded it for an '89 Chevy suburban with a western plow on the front. The guy I traded it to restores old bikes so hopefully it will see a new life sooner then later. JB

Yep floorboard and controls moved 4" forward and floorboards tilted 10deg

I would agree. Cornering feels way more natural now!

These things look to be great quality and hopefully 4" is enough I was torn between these or the 6" ones. I think I should have gone with the 6". Anyway these feel way more comfortable than the stock placement. Also seem to be great quality! Here's the obligatory pics Hardware: http://images.tapatalk-cdn.com/15/08/25/7987fbe8093432550e0cc6224b6773a5.jpg http://images.tapatalk-cdn.com/15/08/25/c1d978ca0f025cc94c436f58048938aa.jpg http://images.tapatalk-cdn.com/15/08/25/4df6716715e6229cdbf864c9efdb07b1.jpg Before: http://images.tapatalk-cdn.com/15/08/25/5ccd65a3e0253c7101af16f73600ef40.jpg http://images.tapatalk-cdn.com/15/08/25/561118a22c96522e8e0f56e5b799dae7.jpg After: http://images.tapatalk-cdn.com/15/08/25/791b1e66a9c78387ca586ef5536fe66c.jpg http://images.tapatalk-cdn.com/15/08/25/0abb51861f65d30d6be11d7b62323ddc.jpg JB

Glad to hear you're fine! Hopefully her insurance covers it all and they don't play games

Just some info for the privacy conscious I thought I'd share. http://bgr.com/2015/07/31/windows-10-upgrade-spying-how-to-opt-out/

If you wanna send me one I should be able to replicate.

Those would be possible

There r a few side panels with them in eBay right now not too badly priced

I'm guessing this is what you are talking about: if so, unfortunately, the size is too big for the footprint of my build platform on my 3d printer.

Are either of these the vents your asking about? http://images.tapatalk-cdn.com/15/08/17/2e15ac6a55e3458d96633aa9113482a9.jpg

Here is the printer PowerSpec 3D Pro Printer from Microcenter. Software I use: 123D Design for the drafting and Simplify3D for the slicing and printing. I would say I am beyond impressed with this printers performance especially in conjunction with the software I'm using. Below it are all the colors I have to print in at the moment as well as bright green and yellow. JB

I'll take a look at me vents tomorrow and see if I could duplicate.

The grip itself shouldn't be too difficult if I have one to work with and measure out. The problem is if there is any detail on the grip like knurling or whatever. I'd be willing to try though.

I used standard PLA and a pretty decent infill so it should hold up just fine. I have a sleeve I printed to slide over my ham radio car antenna to keep it from folding over once I get past 60mph and that held up just perfect all summer and winter in Minnesota