Jump to content

MikeM8560

Expired Membership
 View Profile  See their activity

  • Posts

    644

  • Joined

  • Last visited

 Content Type 

Everything posted by MikeM8560

  1. MikeM8560
    Try this stuff, I use it on all my bikes parts great stuff, its made for the aircraft industry but work on all plexi and plastic window. you can find it also at West Marine.I sell it for my marine canvas customer to clean there clear vinyl windows. it had a anti static anti fog. http://www.aircraftspruce.com/catalog/cspages/csmisc/210plasticpolish.JPG http://www.aircraftspruce.com/catalog/cspages/210cleaner.php
  2. MikeM8560
    Check this one out volt amp temp and charger http://www.customdynamics.com/kisan-battery-charger.htm
  3. MikeM8560
    AYE here ya
  4. MikeM8560
    my garage opener had a small opener that fits on your key ring, easy access also.
  5. MikeM8560
    Seems there intent is for larger boats.
  6. MikeM8560
    2 might be a tad heavy on my transome, on my wallet also
  7. MikeM8560
    on the left menu go to used CP then go to edit vbpigallery, there you can edit and upload photos from you hardrive or onlike photobucket pics in the window.
  8. MikeM8560
    Looks Good!
  9. MikeM8560
    Muffinman is the computer circuit board on the back of the dash panel?
  10. MikeM8560
    have used it for a few day nows and I love it no more yelling to my riding buddies. and music in the helmet is good also.
  11. MikeM8560
    I installed The new JMCB-2003 CB this weekend. when purchasing the unit i ordered the yamaha mounting kit. the kit is for the star bikes. you remove the left mirror and bolt the mount in its place the the mount and cb mount to the rear of the bolt and the mirror bolt into a hole in the cb mount plate. well this doesnt work with the 1st gen as the clutch resovoir is a bit higher then the bolt on our bike that has no mirror in it. the bolt is used to hold the stereo control switch box. this also was an obstacle. wha i did was remove the switch from it mouning tab by the 2 small scres on the backside. I then turned the mount over so the switch was down rather then above the mounting bolt. tropuble wasa now due to the angle of the metal piece and the switch box when mounting the cb down tight over the stereo switch it pushed down on the switch and cause trouble with the switch operation. So i removed the stereo switch and drilled a new hole so it mounted about a 1/4" lower. installed the cb and all fit well now. I then removed the stock antenna and installed a Firefly cb antenna with fold down mount from http://www.walcottcb.com/ I wanted to keep the single antenna so i added a splitter in the cable so the antenna works for bolth cb and stereo. I suppose the splitter take away from the cb power but im just looking for communication for group riding. not long distance talking. with the stereo input tapped into the stereo speakers the music from my stereo and Ipod with fm modulator is heard in my headset along with the cb. they also have a way to connect cell phone and gps if you like. in the first photo you can see a hole in the front of the cb on the chrome mount the is the hole they say to use to mount it but i used the hole in the back that for the mirror instead because othe the resevoir being higher on the 1st gen. you can also see the new lower stereo controls position.
  12. MikeM8560
    That aint air:scubadive:
  13. MikeM8560
    Freebird in an earier post i tried the button in the tool bar above where typing a post for inserting photos no photo would apear only the url adress so i had to use the manage file way to have a pic.
  14. MikeM8560
    Acholol works well for cleaning any wax ect off the area to be stuck. No fish not the consumable kind:starz:
  15. MikeM8560
    I set up a trike shop fairing for my brother 650 a while back , turned out nice http://www.international-star-riders.com/starcruiser/newstar/article.php?issue=2.8&article=117
  16. MikeM8560
    many time when id try to start ahd the motor would act likes its flodded, I would hold the throttle wide open and pull start it, It is pull not electric? then it would clear up anf one a a few pulls and clear out/ if that dont work get a POLARIS:rotf:
  17. MikeM8560
    What are you taking 2007 off Charley? must take a long time to melt
  18. MikeM8560
    I was looking at theese shorties myself http://www.sierra-mc.com/products.asp?cat=172
×
×
  • Create New...