Jump to content

93 venture

Supporting Member
 View Profile  See their activity

  • Posts

    472

  • Joined

  • Last visited

 Content Type 

Everything posted by 93 venture

  1. 93 venture
    I think you could use that truck to pull stuff from the pond
  2. 93 venture
    Warp drive indicator
  3. 93 venture
    We will be there too, have hammers will travel
  4. 93 venture
    I would like some sweet italian sausage and some bacardi's 151. Might be a good idea to hide the 151 till after we get your bike back together. That stuff has a little kick to it.
  5. 93 venture
    Yes i think you would get a set light, until the speed would drop below the set value, i have also had the clutch handle switch fail on mine, from the handle and pivot being wore out.
  6. 93 venture
    Yeah your right it does have a vacume pump, dont know what i was thinking,anyhow it has vacume lines that can crack,thats what happen to mine one time the line on the pod was cracked. In the manuwal there are T/S steps on how to test the cc.
  7. 93 venture
    Not a problem,just let me know when your ready to put her back together. I just got me a new set of hammers the other day i been wanting to try out.
  8. 93 venture
    Check for vacume leaks? Vacume line from left front intake boot.and there is a line on the cruise vacume pod, its kinda behind the head light on the right side of fairing.
  9. 93 venture
    OH NO! little bags of nuts? Tell me you didnt have to remove any wiring.:rotf:You got bored:confused24: +++++++++++:stirthepot:
  10. 93 venture
    This works a lot faster, i have turtle net and i can tell this is working lots better than the other one ever did, Thanks Don you rock!
  11. 93 venture
    When i put my mounts in it took me about 6 hours but i did not change the left rear lower , because the only way i could see to change it was to just about take out the engine or take ever thing loose and turn the engine in the frame to get at it. my bike had about 78,000 miles on it when i did the mounts, my old rubber mounts were shot. i could put a pry bar under the engine and on top of the frame and move the engine about 3/4" up and down they were so bad. after i replaced the mounts and test drove the bike for the first time it was a new bike, and the feeling of the rear end on ice went away for good after 80 mph. i have had it up to 115 mph and it still felt fine no shakes or fish tailing. you will feel a little more engine vibration, but its worth doing for sure. all of the 2nd gens come from the factory with solid mounts installed, maybe yamaha did know some thing was up with the shake problems
  12. 93 venture
    Well that would suck, Did your buddy pass his test?
  13. 93 venture
    Thanks Don, Wish i knew more about this stuff to help ya out but i dont.
  14. 93 venture
    My 93 was wild at speeds 80 mph and above, i adjust my steering bearings,installed fork brace,`helped alittle but still had a bad wiggle above 80,it was ok with 2 up but by myself it was bad,check my moter mounts with a pry bar and bet i could move the engine 3/4 of a inch up and down,installed solid moter mounts and problem is gone.at hi speeds on mine before i change the mounts it felt like the rear end was on ice. it would chase cracks in the road,but all better now.
  15. 93 venture
    Thanks for the pics John,was good seeing you again, your gonna have to ride over to IL. with us this summer, me and Kevin end up going over there alot. got to get some miles on that new bike!
  16. 93 venture
    Dont forget you have a pick up coil under the fly wheel cover, unless a 83 did this in anouther way, im not sure if the tci has battery power as well as key switch power, i would think it should have both. maybe someone has a extra tci they would loan ya for a test before you spend the big bucks on a new one.
  17. 93 venture
    I seen where you had cleaned the out sides of the carbs, have you tryed lubing up all of the moving parts on the carbs and cables?Maybe sticking from being dry.
  18. 93 venture
    I have heared some of them have been able to take out the front turn signals to remove the nuts from the back side of the speakers,instead of taking the dash panels apart.You might want to take one out first and get a speaker with the same size magnet, there is not a lot of room in there.
  19. 93 venture
    The size is 4", i got mine at walmart for around $48 bucks,im sure they are some out there for more money and that have better sound.pioneers are the brand and so far that rain hasnt hurt them.I have had them in the bike for 2 years now.
  20. 93 venture
    Put you bike up on the center stand over night and pull the drain plug, if there is any coolant you should see it drain out first maybe before you get the plug out, im not sure but the cc breather looks like it might also be some kind of oil cooler, it looks to have a coolant line running to it in the part pictures.
  21. 93 venture
    Hey Don, did anyone fix the street sign at the end of your road? I was thinking last year it was hard to read or someone had painted over it.
  22. 93 venture
    Moose you need to worry, He also has CRS and wont be able to operate the GPS! :rotf:
  23. 93 venture
    i Am Also Doing My Starter Clutch,so Far Job Hasnt Been To Bad Till I Got To Pull Off The Flywheel,wow Is That Thing Stuck, I Have A Cheaper Auto Part Store 3 Bolt Puller And It Has Bent The Puller,so Im Gonna Bring Home My Snap On Puller From Work And Try A Little Heat And The Punch,cant Wait To See How Far This Thing Is Going To Fly When It Comes Off!
  24. 93 venture
    hey Lonna, Leadwolf56 Wants To Know If You Could Make Him Some Cheesecake With Rocky Mountain Oysters On Top. He Really Digs That Stuff, He Wont Ask You Himself, But Being My Buddy I Thought I Would Ask For Him:) by The Way I Will Stick With Plain Cheeze Cake,thanks
  25. 93 venture
    YES I WANT CHEESECAKE!!! I LIKE IT PLAIN ON GRAMCRACKER CRUST WHAT OTHER KINDS ARE THERE?:confused24: IS IT FAT FREE,NO TRANS FATS.YOU KNOW I GOT TO WATCH MY FIGURE:rotf::rotf:
×
×
  • Create New...