Jump to content

fwbpastor

Expired Membership
 View Profile  See their activity

  • Posts

    24

  • Joined

  • Last visited

Everything posted by fwbpastor

  1. fwbpastor
    I bought those same lights from ebay and am very pleased.
  2. fwbpastor
    thanks for the help. Installed it today and it works great.
  3. fwbpastor
    I have a 08 RSV and getting ready to install a Biker's Choice tach. It says the green wire goes to the negative terminal on the coil. Is there a coil diagram available to show me where the negative terminal is? Thanks
  4. fwbpastor
    I bought the amplirider to split my aux port. It works great. http://www.electric-avenues.com/amplirider.html
  5. fwbpastor
    I live a couple of hours east of Raleigh, would be glad to help if needed. I bought the morgan carbtune and am very pleased with it.
  6. fwbpastor
    I got mine in less than 2 week. I took the advice of everyone and ordered the Morgan Carbtune and am very pleased,
  7. fwbpastor
    I bought mine from Jake Wilson. Very pleased.
  8. fwbpastor
    I got this set and they work great. http://www.harborfreight.com/18-piece-t-handle-ball-point-and-hex-key-wrench-set-96645.html
  9. fwbpastor
    08 RSV with stock pipes. I get 46-49 MPG consistently. I've been using sea foam in the last 3 tanks. I also use Mobil 1 20w50 synthetic oil. I'm a happy camper!
  10. fwbpastor
    Decided to spend a little more and ordered the Morgan Carb Tune. Should get it in a couple of weeks. Thanks for all the help.
  11. fwbpastor
    I think 10,000.00 will get it. Pretty sure of it.
  12. fwbpastor
    Here's a 2009 RSV in Greenville, NC. http://www.ncpowersports.com/new_vehicle_detail.asp?sid=08698694X4K9K2011J6I14I21JAMQ1448R0&veh=87140&pov=1990827
  13. fwbpastor
    Would this be OK to sync the carbs? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=300529194899&viewitem=&sspagename=STRK%3AMEWAX%3AIT Where can I get the Yamaha engine tach, part #YU-08036-A, 90890-03113 Thanks, Melvin
  14. fwbpastor
    After putting louder pipes on my 08 RSV I noticed I was getting about 8 mpg less than my stock pipes. I decided to put the stock pipes back on.
  15. fwbpastor
    Agreed. I am a new owner of a 08 RSV and I have learned so much and received a lot of help by many on this board. Many Thanks.
  16. fwbpastor
    Installed Elite 3's today on my 08 RSV. Nice smooth ride. Bought them from Jakewilson.com:cool10:
  17. fwbpastor
    Here is a good site for all types of motorcycle mounts for the Tom Tom. http://www.mountguys.com/category_s/1095.htm
  18. fwbpastor
    It's called an Air-Bag. It is all for safety purposes!
  19. fwbpastor
    Hi, Just bought and installed driving lights on my 08 Royal Star Venture as well as the light visors. I bought everything off ebay from the following sellers. They were brand new OEM parts. Everyone here were really good at giving me some great advice on how to wire the lights. I used a relay like everyone recommended as well as the Kuryakyn Master Cylinder switch. They look great on the bike and work really nice. http://cgi.ebay.com/ebaymotors/Yamaha-Royal-Star-Venture-Driving-Light-Kit-_W0QQcmdZViewItemQQhashZitem588cfe9926QQitemZ380322617638QQptZMotorcyclesQ5fPartsQ5fAccessories Aleks Powersports http://stores.ebay.com/GENUINE-YAMAHA-ACCESSORIES/_i.html?_nkw=royal+star+venture&_arm=1&_armi=Cruisers&_armm=351&_ruu=http%3A%2F%2Fstores.ebay.com%2FGENUINE-YAMAHA-ACCESSORIES%2FCruisers-%2F_i.html%3F_nkw%3Droyal%2Bstar%2Bventure%26_arr%3D1%26_fsub%3D11801613%26_sid%3D311021261&_sid=311021261&_rdc=1 GENUINE YAMAHA ACCESSORIES Hope this helps, Melvin
  20. fwbpastor
    Thanks for all the replies. I've just had a hard time getting my brain around the idea or necessity of a relay. I will install a relay today on the bike for the driving lights. Again thanks for all the help. Melvin
  21. fwbpastor
    Here’s my question. Why have a relay for the driving (passing lights). My front fairing is still apart and I can change my wiring easily. I bought the Kuryakyn Master Cylinder switch and have the hot connected to the Red wire with yellow strip (power on all the time when key is turned on). One of the switch wires I connected to the driving lights. The hot wire to the switch has a 30 amp fuse and the wire going to the lights has a 10 amp fuse. There is power to the switch when I turn the key on and I can toggle the driving lights on and off with the switch. If I ever forget to turn them off, the power is cut as soon as I turn the key off. I don’t know a lot about electrical draw and amps, but was just wondering why I needed to put in a relay. Other than the fuse being in the fairing, is there any problems with the way I hooked it up? Thanks Melvin
  22. fwbpastor
    Just bought a 2008 RSV 3 weeks ago. My wife says it is very comfortable and I have no regrets with the power. I'm a big man and with both of us riding it has all the power I need. I was impressed with 48 mpg on my first gas tank.
  23. fwbpastor
    I want the to be able to come on when I desire, not when the ignition switch is turned on. I want to be able to control when I turn them on and off. Thanks, Melvin
  24. fwbpastor
    I'm about to install Yamaha driving lights on my 2008 RSV. I've read all the post I can find about how to wire them using a relay until my eyes are tired. This is how I want to be able to use them. I want the ability to turn them on and off manually using a switch, not having them come on with either the hi-beam or lo-beam. I saw somewhere, and now I can't find it, a diagram of the color coded wires coming from the headlight. always on, hi-beam, lo-beam. Any help would be appreciated. I'm new to this so please be patient with me. Thanks.
×
×
  • Create New...