Jump to content

etcswjoe

Supporting Member
 View Profile  See their activity

  • Posts

    5,025

  • Joined

  • Last visited

  • Days Won

    18

 Content Type 

Everything posted by etcswjoe

  1. etcswjoe
    Glad you are sticking around.
  2. etcswjoe
    tequila
  3. etcswjoe
    I am half way ready for Maintenance Day, I changed my brake lines, rebuilt my master cylinders, changed my brake pads, new tires, changed stator and put new regulator in. Now all I need to do is service my trailer, check out my camping gear and pack.
  4. etcswjoe
    In our thoughts and prayers.
  5. etcswjoe
    I might defect if they had more passenger and leg room.
  6. etcswjoe
    Even with speed bleeders it took a good half an hour of pumping to clear all the air.
  7. etcswjoe
    i just went through the same thing and if you put the seals on as shown in the parts diagram you probally did not put them in correctly. Make sure the seals look just like the old one and when you bleed them make sure the bike is upright.
  8. etcswjoe
    Dan, Remember "tent poles"
  9. etcswjoe
    Anyone find a flea market yet?
  10. etcswjoe
    In our thoughts and prayers.
  11. etcswjoe
    I did this mod awhile back and used the adapter it is listed in the classifieds. http://www.venturerider.org/forum/photopost/showproduct.php?product=4&title=aux-lighting-harness-for-2nd-gen-venture&cat=18 I liked the way you ran the wires in the bag rails, I was lazy and just used snakeskin and tied wrapped the wires to the rails.
  12. etcswjoe
    We will both be there and at least one other couple, be good to see y'all and glad you can make it.
  13. etcswjoe
    Merrily Foolish
  14. etcswjoe
    We are keeping you in our thoughts and prayers
  15. etcswjoe
    I figure another 40 or 50 years.
  16. etcswjoe
    I got the seal over the lip fairly easy and finished the rebuild with expert help for just 12 dollars a year
  17. etcswjoe
    Cool Thanks!!!
  18. etcswjoe
    Any idea how to get seal over the tab on the piston?
  19. etcswjoe
    Started to rebuild my front master cylinder and when I went to put the piston back in I noticed the rubber seal on the piston that came out is not in the same place as the parts diagram shows. I have attached pic of both, which one is correct? The top one is the new one and the bottom one is the one I removed.
  20. etcswjoe
    In our thoughts and prayers.
  21. etcswjoe
    Cool pic and great story.
  22. etcswjoe
    You, Your Bike and a flea market
  23. etcswjoe
    I have a Buckeye Performance one and it works well but I would recommend rebuilding or replacing your R/R connector and your stator connector.
  24. etcswjoe
    Went for a nice Sunday ride today and found this:
  25. etcswjoe
    I would be glad to help also.
×
×
  • Create New...