GolfVenture

This is how it really ended... put your volumn up loud...

Congratulations to the Patriots Team, Their Fans, Tom Brady and he Coaching Staff. You played to untimately win the game. After having just called a time out, in how to plan the last 20 seconds of the game to win, with 1 time out left ,on the 1/2 yard line, 2nd in Goal....With a mininum of 2 attempts, maybe 3 attempts...A blind dog knows to take the 1st shot by running the ball...If the Pats made the same decision as the Seahawks just did, The victory just wouldn't be as Victorious. Had the Pats held the Hawks with a missed run and then a missed pass, then the taste of Victory would have been Grand. Patriots played the entire game, giving 100% by the team and coach to WIN period. That play of the Hawks was not decided to have the One single goal in mind, and that is to Win. It was a statement and that said, if the Hawks are to Win, they wanted to win with a play that would have awarded the MVP to Wilson...The Offensive Cordinator, Head Coach, the QB...EGO got in someones head... I've only gone to about 3 Seahawks games since 1976...I don't have anything invested in the game except entertainment. It was a great fought game. Fairly refed game...Wilson had the ultimate decision to audible and take one shot into the end zone, call time out. Then let it all hang out one the last possible play. I have to feel for the players whose dream as a kid is to to win the Super Bowl and now some will never ever play in a Super Bowl again. I feel for the Fans whose entire life is Seahawks...and have paid thousands of dollars... If you are going to loose, loose by using all the options available... To the players and dedicated fans...Their Trust has been tarnished... Oh Well...next year...Go Hawks..

The Seahawks would challenge any other team to over come such odds...

1 Last Giant to Slay...Only Time Will Tell... Brady vs Wilson? Wilson, undefeated against the future HoFers of Brady, Brees, and Manning. Already slew two of the big giants, Manning on the big stage (2014 Super Bowl) and Brees in the divisional, last year. Rodger Just a Warm Up, Yesterday...Why not another Giant to Slay...Brady? History is always in the making... Never Say Never... Go Seahawks... Slash E'm with the Claw... Rip E'm with the Beak... Bring on the Patriots... Meat!...Meat!...Meat!... Beast Mode Legion Of Doom Wil.....son.....!!! So Called Average Players... 12th Man! All the Seahawk team and Staff. "Why Not Us..." Go Hawks... Repeat!...Repeat!...Repeat!!! Back To Back Super Bowl Wins!!!

Does anyone know if the chrome front fender extension piece are interchangable on the MKI sv MKII?

Should the SeaHawks prevail on Sunday against the Packers (Knock on Wood), which match-up makes for better TV: Luck vs Wilson? Two young guns, two futures of the NFL, going head to head? One, the first, and nearly unanimously the first, draft pick of the '12 draft. The other a vastly underestimated, underrated, and "undersized" 75th overall pick. One is nearly 6'4" and weighs 240. The other not even 5'11". One "wins with less". The other a magician and unheralded escape artist. Or Brady vs Wilson? Wilson, undefeated against the future HoFers of Brady, Brees, and Manning. Already slew two of the giants, Manning on the big stage and Brees in the divisional, last year. Why not another in Brady? Go Seahawks... Slash E'm with the Claw... Rip E'm with the Beak... Bring on the Packers... Meat!...Meat!...Meat!... Beast Mode Legion Of Doom Wil.....son.....!!! "Why Not Us..." Go Hawks...

I took up golfing in my 50s, then later got back into biking after about 27 years. When I got my 89 Venture I got a m/c trailer so I could haul my golfing equipment in it so I could ride to the golf course for I'm a fair weather golfer & rider. So... "Golf&Venture"...

My son and I kept searching and then found a forum on it. Identified the board and the 2 caps with the correct item number. Will go to Radio Shack tomorrow as recommended. Supposed to be a $5.00 fix.

I work for Boeing the past 26 years. We normally get the 24th thru Jan 1 off, unless one works in a group that is behind schedule. I have at times worked right thru the holiday break.

The outside controller for the water and ice has a small round door that opens so the ice can slide down from the ice maker through the round door into the glass. For no reason both the water and ice stopped dispensing and this small round door keeps opening and then after the small round door opens fully the spring then shuts the door quickly. This cycle occurs every about every 7 seconds give or take a second. Several lights on the controller door keeps flashing. The water dispenser was flowing water very fast to the filter today so it is not pluged. I have pretty much dismantled the the controller door, looking at the small mother board and the motor unit to the ice dispenser. This where I could use some suggestions please.

It must have been an air pocket for it seemed to have gotten better with more use.

I have a 98 Nissan Quest, bought new with 200k now. Recently drove 800 miles in a day. The heater gage would vary from lowest normal to mid normal and the heat varied with it, through out the 800 mile trip, But mostly stayed on the very low normal mark on the gage. I installed a new thermostat with a radiator flush and new anti freeze. Also new transmission filter and fluid. The heater gage now works normal all the time, but the temp initially get hot but then cools down, then gets hot, then cools down. It seems like if I do not change the heat vent setting from defrost to floor vent to dash vent the hot air most of the time stays on hot. But when I change the vent settings is when the hot to cold variation occurs the most. Any Suggestions?

Great Thanks.

I recently purchased a 14 amp electric chain saw with a 100 ft 12 gage extension cord. So far works great cutting up fire wood. I'd like to go into my property further to fall more trees. My question is if I purchased another 100ft 12 Gage extension cord would that drop the amps in a way that would be harmful for the 14 amp electric chain saw?

Mike: Could you tell me more about your electric chain saw. I read about them but did not know how well they cut. I will be taking down some trees to build a new garage. 100ft extenson cord would work good for me also.

I am able to keep it going by pushing on the plastic primer pump every few seconds. I will try to pick one up later this evening with some new hoses.

I can get it started but it seems to use the fuel in the carb then dies. The plastic pumper pumps. Can those little pump go bad and not let fuel to be sucked up by the carb, but pumps when pressed?

This was taken on Saturday 23rd August, climbing the hill and just past the Puyallup Fair in Washington on Hwy 512 westbound.

Thank you Jim for your suggestions. A couple thinks to mention is that while during continuous riding the Scrambler runs fine. Also at a stop as long as he continues to slightly feather the throttle the engine keeps running. The engines runs at an idle after the choke is off during start up, but as the engine begins to warm up, the engine at an idle eventually dies.

My sons friend bought a 1972 Honda 350 Scrambler and while idling it will suddenly die. He used a strong Sea Foam solution thru several tanks. When initially starting, with the choke on it will start up and run then with choke off run good. Then he takes off and when he comes to a stop within 5 to 10 seconds it dies. Both carbs were rebuilt from a cafe racer shop. New plugs and wires, points and condensor. Any ideas?

I was looking for a set of car ramps for my trailer of which the bed stands 24 inches of the ground. The ramps are 10 feet long, which creates an angle of approach and a high center of 11.53 degrees. I found a car display rack selling for $495.00. Asked what the seller would go down to. He said $400.00. I told him I would think about it and get back to him. Later I offered him $300.00 and he accepted. I found similar new ones online going for $1260.00 plus $750.00 for shipping. This will be great for my new shop/garage that is currently in the planning stage.

Thanks to everyone for the info and safety advise. I will pick them up today. The 4 (MF7U L60447) I'll put on the 2 axles. I only bought the trailer 6 months ago because I have a small Kubota backhoe. Thought I might one day want the capability to transport the Kubota. So far I've only used the trailer 2 times. Once for firewood and once to purchase a set of Auto Display Rack and ramps. The existing tires are almost to the Tire Wear Bars. My load expecations won't even come close to even 1/2 the 4 tires load capabilities. And I'd be pushing it to put more than 500 miles in a year. I just couldn't pass up the trailer, built like a tank and got it for $1500.00.

They are Goodyear Hi-Lander. Made In USA 7 x 14.5 No DOT letters found MF7T L5A063 8 x 14.5 DOT found with "MF7U L60447" right underneath DOT. Nothing besides the DOT found.

I'm looking at some Mobile Home tires on craigslist for my utility trailer that has mobile home axles. The tires were used only to move the mobile home into the court. Then the tires were put in the mobile home shed and stored for years. The seller is not the origional owner of the mobile home so does not know the tires approximate age. The tires is well preserved. no cracks on the side nor in the treads. The tires looks so good that the center tread still shows the center mold line. I looked up "How to determine the age of a tire" and the format does not seem to match. I'm hoping that some tire professionals will see my post. Here are the Tires codes MF7T L5A063 MF7U L60447

I have a broken mirror. I see that on ebay I can purchaae a replacement lense for $10.00. I've never replaced just the lense before. Is this difficult to do and is the result OEM satisfactory.