ragtop69gs

Nice bike there Don! Guess you didn't learn your lesson with the last off brand bike you bought! [emoji102] Sent from my SM-N920V using Tapatalk

We are going to come up fro.a day ride or two, can someone post an itinerary please. I now live in Pickens county SC. And am looking forward to meeting some.new friends. Sent from my SM-N920V using Tapatalk

Happy to hear you'll be riding soon. [emoji1360] Sent from my SM-N920V using Tapatalk

Let me restate that. It is the inner race on the hub side, it necks down slightly on the end that goes into the bearing. Sent from my SM-N920V using Tapatalk

It's the outer spacer on the hub side. Sent from my SM-N920V using Tapatalk

Is this what you are looking for? Had this on my spare wheel. Sent from my SM-N920V using Tapatalk

Check with Mike Eykamp or Ed Williams. Chances are one of them will have that part. Sent from my SM-N920V using Tapatalk

Not sure I'd trust that welding job! Sent from my SM-N920V using Tapatalk

I'm installing a new rear valve cover gasket, have the old gasket out and the sealing surfaces cleaned up. Last time I did this I used RTV silicone to seal the halfmoon area on each end of the head and after several years it was leaking again. Idon't have any RTV on Hand, but I do have a tube of Yamabond 4 semi drying liquid gasket, will the yamabond 4 work with the new rubber gasket?

Thanks, I was able to patch it up again with some epoxy putty. Maybe Ill get by for a while.

It's pulled loose from the mounting plate and pieces of the plastic housing that secure the screw ferrels are gone. I think it was caused by brake fluid that splashed on it while bleeding the clutch several years ago. I'm trying to repair it again, but eventually I'm going to need a new housing or a complete remote. Sent from my SM-N920V using Tapatalk

I am looking for a non functional radio remote control to use for parts, if you have one , let's talk. Thanks. Sent from my SM-N920V using Tapatalk

I didn't have one out when I posed the question. The answer is 8x1.25x25mm

Time to repair my ignition switch, , what size bolts do I need when I reinstall the switch?

@cowpuc I thought you would have stopped at the first rest area and started swapping parts! We all know you don't like shiny things. Sent from my SM-N920V using Tapatalk

Hello Carl, Its Not to far from home, if I miss anything I can always go back again Sent from my SM-N920V using Tapatalk

We are going to run the Moonshiner 28 this morning, any suggestions on what to stop and see along the way? We will be riding it from the south end to the north. Sent from my SM-N920V using Tapatalk

Yes, and the guys in those little houses are on a first name basis. I guess they just love to talk with me when I come to visit! Sent from my SM-N920V using Tapatalk

Glad to hear Sharon's foot isn't broke and that you're back in the saddle already. Between Mike and Ed they probably have what you need to fix the scoot. Sent from my SM-N920V using Tapatalk

Welcome to the club. I took one out back in 2010 , dusk coming north out of Red Lodge,MT. Wifey on the back, trailer in tow, sent the deer ass over tea kettle into the woods ! We stayed up, bike fender, passing lamps, signals and light visors all mangled [emoji21] Pulled the fender off the tire and finished our 2 week tour. This was all after Mr. Groundhogs met my front tire on our ascent of Beartooth Pass. My buddy that lives out there said he was going to report me for hunting without a license! [emoji1787] Sent from my SM-N920V using Tapatalk

The flooding in Michigan is not near Puc's home. Most likely he's CTFW or family obligations. Sent from my SM-N920V using Tapatalk

Probably the same tornado that passed within 1 mile of our house Sunday morning at 3:45 am. Sent from my SM-N920V using Tapatalk

Thanks, I'll forward that item number to him. [emoji1360] Sent from my SM-N920V using Tapatalk

Have a friend of a friend who just bought a Stryker and is wanting to put a batwing fairing on it. Does anyone know of a setup he can use, new or used? Sent from my SM-N920V using Tapatalk

All is well here in Upstate South Carolina. Jeannie and I are virus free and hope to stay that way. Lots to do around the new place, ridding the woods of thorny vines, grape vines and Holly trees. Replaced all the facia on the house, new roof, gutters go up next week. Whew,,,,, think I'll go for a ride. Ý'all stay safe. Sent from my SM-N920V using Tapatalk