Jump to content

okiefirefighter

Expired Membership
 View Profile  See their activity

  • Posts

    42

  • Joined

  • Last visited

 Content Type 

Everything posted by okiefirefighter

  1. okiefirefighter
    OK. Thanks a whole lot. Kevin
  2. okiefirefighter
    So do i need 4 or 5 for my 87 VR? Thanks, Kevin
  3. okiefirefighter
    So there is not one up below the handle bars?
  4. okiefirefighter
    Great info. Thanks, Kevin
  5. okiefirefighter
    What years are in the 1st gens, and what is a MkII? Kevin
  6. okiefirefighter
    What is a Mk 2?
  7. okiefirefighter
    OK you guys have gotten my curiosity up. How many speedbleaders do I need to do my whole bike? It is an 87 VR? Thanks, Kevin
  8. okiefirefighter
    I have tried taking the front calipers apart and cleaning them. Now what is the secret to bleeding them? Thanks, Kevin
  9. okiefirefighter
    OK Thanks, JB.
  10. okiefirefighter
    Ok. Thanks guys. I have not bought from Ebay. Can't get to it from the station computer anyways. Kevin
  11. okiefirefighter
    Bill, it is on the left side. I need a service manual. Where to buy a good one? Kevin
  12. okiefirefighter
    Ok I will try this next week. Thanks, Kevin JB
  13. okiefirefighter
    Yes. Do you know where I can buy the wires and plugs?
  14. okiefirefighter
    I bought 2 helmets at a garage sale last weekend. Don't remember what kind of headsets they are, but does anyone have a diagram that I can get and wire these up so I can talk to the wife while riding without screaming? Kevin
  15. okiefirefighter
    My 87 VR doesn't have a knob on the reserve valve for the gas tank. Anybody have one extra or can tell me where I can get one? Kevin
  16. okiefirefighter
    OK I bypassed the sensor with the 2.2 ohm resistor. Instead of hooking to the acc. wire, I hooked a conector to the wire and mounted it under the screw that went to the fuse that I was supposed to solder to. Is this OK? Kevin
  17. okiefirefighter
    87 VR has sat since Oct, last year. THe front caliper is sticking now. What is the fix? Kevin
  18. okiefirefighter
    Sounds like a deal Kevin
  19. okiefirefighter
    Hey lonestarmedic, would you also offer that resolder job to a fellow FF from Oklahoma? I seem not to be able to fix mine. I would also be willing to pay you for your services. Thanks, Kevin
  20. okiefirefighter
    OK, I cut the sensor off and soldered on a resistor. It works!!! You guys are the bomb!! kEVIN
  21. okiefirefighter
    Can I leave the sensor on, and solder a resistor on to it? I would like to be able to go back to original when I replace this battery.
  22. okiefirefighter
    Does the sensor have to have voltage running through it?
  23. okiefirefighter
    OK Thanks Kevin
  24. okiefirefighter
    I just wanted to say a big thanks to everyone that has put information on this website. Without it, I don't know if I would have been able to get the foks back on my '87 VR. I took it apart about 6-7 weeks ago and dropped the forks off to have new seals installed and put in the new Progressives while it was apart. I can just about fix anything, but when your memory has nothing to recall from past experiences..it makes it kinda hard. With all of the fixes that everyone has done and all of the pictures, I have finally gotten it back together and had my first ride in a very long year. Thanks again for all the help. Kevin
  25. okiefirefighter
    I got mine in mid August and just got them on this week. They are the best thing for a slow cranking engine!! Way to go Paul!! Kevin:bowdown:
×
×
  • Create New...