Jump to content

crowrod

Expired Membership
 View Profile  See their activity

  • Posts

    181

  • Joined

  • Last visited

 Content Type 

Everything posted by crowrod

  1. crowrod
    I just purchased a set of springs from sonic springs part #35s-120 (xvz13 royal star 95-05) started to install today removed first spring its 22 5/8 inches long, sonic is 12 3/8 they gave me a pvc tube for spacer stock, I will need more spacer for the other side, Ok my question is has anyone made these changes and how?????
  2. crowrod
    Me and the wife riding the Dragon.
  3. crowrod
    There is a bushing in the side stand that will wear and the bike will lean more. I changed mine and it took quite a bit of the angle out,not to hard to replace and I think the cost was about $7.00 dollars:080402gudl_prv:
  4. crowrod
    I thought they did not allow motorcycles in the plantations.?????? I would rode there a long time ago!!!!!! what part of the island are you on?
  5. crowrod
    check member venders in the classifieds choose Skydoc he will take care of ya
  6. crowrod
    that pump saved me a lot of time and money! I was on a week long trip from Ohio to Maine when my fuel pump died on our way home in Vermont. found a Auto Zone bought it installed it in there parking lot and finish the trip.what a lifesaver.
  7. crowrod
    http://stores.ebay.com/AZ-Cycle-Parts?_trksid=p2047675.l2563 2008 motor 40k miles $280.00 plus $225.00 shipping:080402gudl_prv:
  8. crowrod
    You could order a new cover from Yamaha and do it yourself ,or may be Rick Butler would do it. also most custom car upholstery shops will do it, and add gel pads or new foam if you like. check your yellow pages for shops in or near your location!
  9. crowrod
    Hi all, what is the easiest way to grease the linkage? is there a way to do it in place, or does it need to be removed? the bike is a 2nd gen.
  10. crowrod
    check your fuel filter?
  11. crowrod
    I think those are 5k ohm, 2nd gen uses 10k ohm here is a part number Plug Cap Assy 4XY-82370-00-00
  12. crowrod
    Here you go, Bolt, Button Head 92017-05018-00
  13. crowrod
    A new plug boot can be bought, but not the wire its part of the coil, You are talking 2nd gen?
  14. crowrod
    look between number 1&3 exhaust headers, there are two small inlet lines this were air is injected into the exhaust ports. same thing with front cylinders,
  15. crowrod
    Question, is one of the two cables from gps for a mike if so that plugs into the B.R. unit other one should be a speaker out which plugs into the 1/8th plug from cassett deck.
  16. crowrod
    You bought a hardly?
  17. crowrod
    THIS IS WHAT I WAS QUOTED IN DEC 2011 ,MZ 506-255 TR at $ 499.00 Gas emulsion shock with adjustable rebound damping and threaded pre-load adjustment via the spanner wrench. CALL THEM THEY WILL ASK INFO ABOUT YOUR SPECIFICS AND ADVISE FROM THERE.
  18. crowrod
    there is a how to in the tech library, under handle bars, good write up!
  19. crowrod

    RSV guages

    crowrod replied to star4772's topic in Watering Hole

    Hiway peg, rotates 180 degrees?
  20. crowrod
    I think those hoses go to the air filter box openings, right at the D slot there is a a loop for them to go in. kinda like a vacuum for vapors.
  21. crowrod
    try using a ratchet strap to lift slowly back up,long allen to alien whole and damper rod. It worked for me
  22. crowrod
    Fast wear on back pads will happen when fronts are not up to snuff, front bakes should be 80% of stopping power. HH pads will help some.
  23. crowrod
    I am sure someone will correct me if I am wrong but I think 1998-2003 r-1s will fit . also calipers from late model road stars will fit. As long as they are not radial calipers. Your older brake lines and m/c will work if that is the way you need to go. I would try to find a complete road star set up, m/c lines ,calipers. that way it is plug and play(simple swap)
  24. crowrod
    the one I was looking at has a broken mirror mount,you would not want it ebay has a few available but not at $29.95 look under Yamaha Road Star front master cylinders.
  25. crowrod
    Zac, pinwall has a 14mm m/c for $29.95( buy it now) they claim its the way to go!
×
×
  • Create New...