Jump to content

kingtut

Expired Membership
 View Profile  See their activity

  • Posts

    43

  • Joined

  • Last visited

 Content Type 

Everything posted by kingtut

  1. kingtut
    How do you get to "classifieds" ? Can't find it on the home page.
  2. kingtut
    Thanks to all for the info provided.
  3. kingtut
    I am interested in putting Metzler ME888 Marathon Ultra tires on my 2006 RSTD. The stock tire sizes for this bike are: 150/90HB-15 Rear MT90HB-16 Front The closest size in the Metzler (rear tire) is 150/80B-16 My question: will this work on my bike, or is a 16" tire too wide? (The front tire is 16). Any technical tire help anyone can give will be appreciated. And . . . anyone have any experience with the ME888 Marathon Ultras? Thanks.
  4. kingtut

    Added Tailights

    kingtut posted a gallery image in Member Albums

    Added Tailights

    From the album: 2006 RSTD

  5. kingtut

    2006 RSTD

    Images added to a gallery album owned by kingtut in Member Albums

    A few shots of my 2006 RSTD with Venture trunk and Corbin seat.
  6. kingtut

    Tailights 1

    kingtut posted a gallery image in Member Albums

    Tailights 1

    From the album: 2006 RSTD

  7. kingtut
    After reading all the posts and talking with some locals, I ended up putting Avon Venoms on both front and rear. Haven't had a chance for a sizable cross-country ride yet, but the hundred miles here and there that I've done has me smiling. Very nice handling on my '06 RSTD . . . we'll see how many miles I get out of them.
  8. kingtut
    Rebuilt seat by Rich's Custom Seats. Great feel and look.

    From the album: 2006 RSTD

  9. kingtut
    Avon Venoms seem to pop up a lot. Anybody have a distinct preference for anything else . . . and why? Thanks to those of you who have responded.
  10. kingtut
    With all the good reports on Venturerider about the Michelin Commander I was hyped to buy them for my '06 RSTD. NONE available anywhere I could find. Called Michelin and the tech rep said they've discontinued them in the sizes 150/80-16 (front) and 150/90B 15 (rear). So unless someone can direct me to a source for a matched front-rear set of Commanders, I'm looking for a recommendation on the next best option. Avon Venom ? Please and thank you.
  11. kingtut

    Fairing

    kingtut replied to kingtut's topic in General Tech Talk

    Thanks much. Kingtut
  12. kingtut

    Deflectors 2

    kingtut posted a gallery image in Member Albums

    Deflectors 2

    From the album: 2006 RSTD

  13. kingtut

    Sweet13e

    kingtut posted a gallery image in Member Albums

    Sweet13e

    From the album: 2006 RSTD

  14. kingtut
    Has anyone taken the fairing from a Venture and mounted it on a Tour Deluxe? If so, can one simply take off the stock speedo on the RSTD and mount the Venture fairing without adding any special mountings? If mounting hardware is needed, does it replace the windshield hardware on the Tour Deluxe? I like the Venture look but need to stick with my Tour Deluxe, which already has the Venture trunk and passenger seat. Pics on my homepage. Hoppe wants big bucks for their radio equipped fairing and I really don't need or want the audio . . . and they don't sell a fairing without the radio/CD. Any guidance would be appreciated. If it's workable, I'll be looking for an undamaged upper fairing off of a salvage Venture. Thanks.
  15. kingtut

    RSTD 5 (2)

    kingtut posted a gallery image in Member Albums

    RSTD 5 (2)

    From the album: 2006 RSTD

  16. kingtut
    Still looking for Saddlebag Lid Trim for my 06 RSTD. Yamaha wants $177 + some for the governor. Cheapest I have found online is $144+. Would really like to find a used or salvage pair in GOOD shape. Any leads would be appreciated. Thanks. Peaceful crusin'
  17. kingtut
    Is that a Hoppe fairing? If not, I'd appreciate knowing what make, where it can be found, and at what price. Thanks. Kingtut
  18. kingtut
    Hey Naturbar . . . did you go directly to Hoppe for the upper fairing . . . and how much does one have to fork out? Also, if I ordered a Hoppe for my 2006 RSTD (which has a light bar), will any modifications have to be done to install it? Celebrate Life : Live Christ Kingtut
  19. kingtut
    Tech note: Just replaced the stock handlebars on my 06 RSTD with a Flanders bar that has a 2.5" longer pullback. I went through desert and swamp to find the right bar. Earlier on this forum I was advised that the Flanders G2 Road Glide was the ticket. Wrong ticket! The advisor must have assumed I ride a Venture, which the G2 fits. The narrow center dimension on the G2 is only 6", which is NOT wide enough for the RSTD speedo to fit. I first ordered the G2 and they sent one that fits a sorry HD. I returned it and they sent the G2 that fits a Venture, which I don't own. The proper bar for the Tour Deluxe is the H-Bar Wide Max Pullback, part # 650-08783, which I purchased at Phat Performance for $127. I returned the second G2 and got the H-Bar in return. While not inordinately difficult, the installation is a bit fussy and takes an hour and a half or so. I did NOT have to buy longer cables, but did have to re-route existing cables . . . which included pulling the tank for proper placement. I also added Kuryakyn ISO Grips, which add a sharp look and dampen vibrations. The difference is very noticeable. I can now sit against the backrest and not have my arms fully extended and shoulder joints pulled forward. Haven't taken any long trips yet, but driving around town feels much better. To reinforce for Tour Deluxe riders who want a longer pullback: it's Flanders H-Bar Wide Max Pullback, part # 650-08783.
  20. kingtut
    Ah . . . there's always an astute joker in the crowd!
  21. kingtut
    Anybody out there have any saddlebag lid trim rails they want to get rid of? Used is fine if the chrome is still good. I need ones that will fit my 06 RSTD . . . although I think the lid trim is exactly the same for the RSV and RSTD. Part number is STR-1D672-50-00. Please give me a shout and how many razbucks you'd be looking for if they are available. Thanks ps I've already added the side saddlebag trim rails . . . they're just not in this picture.
  22. kingtut
    Thanks to tsigwing and easyduzzit for the correct part number. It's on order.
  23. kingtut
    Did you put that one on your RSTD? If so, how much more pullback did it give you over the stock bar?
  24. kingtut
    Thanks, Buz. I may just see what Phat Performance wants for one. In the meantime, I'm having problems with handlebars. I posted the following on another threat: I'm totally confused. Several folks on this forum said they replaced the stock handlebars on their 2nd Generation RSTD with the Flanders G2, part no. 650-08763. That exact bar arrived from Phat Performance today and I immediately went down to my service guy to replace the stock bar. When he took the speedo off we compared the bars and there is NO WAY the speedometer will fit back over the top of the Flanders G2 bar because the center of the bar is a full 2" narrower than the stock bar, hence the speedo will not fit back over the top of it. For those who have said on this forum that they fit the Flanders G2 on a 2006 RSTD: what did you do with the speedometer? No one ever mentioned have to make any adjustments to remount the speedo, but the tech and service manager both confirmed that there was no way it would fit inside the narrow center dimension of the G2. Anybody out there know what to do? I REALLY need some more pullback on the bike, and thought this would do it. I e-mailed Flanders and even they said the 650-08763 was the bar for the RSTD. But I don't know what they figured a fellow is supposed to do with the speedometer. Maybe they're all thinking about a Venture, where the speedometer placement isn't a problem. Help!!! Another question: how does one start a new thread on this forum? I can't find any button anywhere to click that says "new thread." Also, my RSTD has a light bar. Would the Hoppe fairing fit with a light bar?
  25. kingtut
    I'm totally confused. Several folks on this forum said they replaced the stock handlebars on their 2nd Generation RSTD with the Flanders G2, part no. 650-08763. That exact bar arrived from Phat Performance today and I immediately went down to my service guy to replace the stock bar. When he took the speedo off we compared the bars and there is NO WAY the speedometer will fit back over the top of the Flanders G2 bar because the center of the bar is a full 2" narrower than the stock bar, hence the speedo will not fit back over the top of it. For those who have said on this forum that they fit the Flanders G2 on a 2006 RSTD: what did you do with the speedometer? No one ever mentioned have to make any adjustments to remount the speedo, but the tech and service manager both confirmed that there was no way it would fit inside the narrow center dimension of the G2. Anybody out there know what to do? I REALLY need some more pullback on the bike, and thought this would do it. I e-mailed Flanders and even they said the 650-08763 was the bar for the RSTD. But I don't know what they figured a fellow is supposed to do with the speedometer. Maybe they're all thinking about a Venture, where the speedometer placement isn't a problem. Help!!!
×
×
  • Create New...