cpudoc

Does anyone know where a set of first gen floor boards can be purchased? I have been scanning Ebay but with no luck. Thanks

What are the basic settings for my carbs. I have heard that there are starter settings on the sync screws and idle screws.

O.K., my middle name is "Mcgyver". I had the diaphrams with holes in them, after seeing the price to replace, I used my best friend "Silicone". I cleaned them with an alcohol prep pad and smeared a thin layer over the holes. Seems to have held fine......

Has anyone converted the 1rst gen headlight to something more modern and bright? thanks Ron B

Hey everyone, Just took the Venture (83) up to West Va to ride in the mountains for the weekend. We did 1200 miles in three days!!!! It was the first over 100 mile trip that I have had the bike on. I noticed that around 80 MPH I would get a wobble that felt like the bike was flexing in the middle. The other way I could describe it was that feeling when you hit a rut in the road. Letting off the throttle would bring it back into control. I also noticed that it would do it on the mountain switchbacks around 65 MPH. I checked the front axel, brace and tire pressure (40 psi). I checked the rear axel, swingarm, shock pressue (35psi) and tire pressure (40 psi). Ichanged the dampining adjuster to "2". Now it seemed to get more tolerable after all this. I have not checked the front shock air pressure due to the fact that the line is still hooked up to the Class compressor. The rear line has been removed and fitted with a shrader valve. Could the lack of air in the front forks cause this? If so what should the pressure be in the front and rear shocks? Sorry about the long post. Thanks Ron B