GeorgeAdam

I am going to dig into my problem Friday. Thank you for the information provided. When I discover the cause I'll post the result. One additiona question. Do I need to drain the oil in order to remove the cover?

OK, so now I'm getting somewhere. I saw oil forming at the shifter shaft. Is this seal easily replaced? Or is this a dealer job?

Oil was changed by others prior to purchase. Oil level is where it should be. To my knowledge the driveshaft has not been touched. When on the kickstand the oil drops appear to be located beneath the rear of the motor and to the left. I can not see a specific place where oil drops are forming.

I have a 1300 tha I purchased last month with 11,500 miles. As I have begun putting on miles and getting used to her an oil leak has developed. At first I did not see anything, but thought I smelled burnt oil. Then a couple drops of oil on the garage floor appeared, and now it's 4-5 drops. Today I got underneath and took a look around. The left side of the exhaust collector has oil on it. There is also oil on the lower portion of the driveshaft cover. There is no oil i could see above the driveshaft. So here is my question. What are the likely locations for oil leakage? Is there a sensor I cannot see? (fingers crossed) Or is it a seal for the output shaft?