Jump to content

PapaAl86

Expired Membership
 View Profile  See their activity

  • Posts

    12

  • Joined

  • Last visited

Reputation

10 Good

Personal Information

  • Name
    Allan Durant

location

  • Location
    Oriskany Falls ny, United States

Converted

  • City
    Oriskany Falls ny

Converted

  • Home Country
    United States

Converted

  • Interests
    camping
  • Bike Year and Model
    Venture royale 86
  1. PapaAl86
    how do i replace my ignition switch on 1986 yamaha vr ? thanks Al
  2. PapaAl86
    Thanks for the help getting my VR running again. It was my ignition, took it apart & the contact plate was bent. I straightened it & put back in it RUNS:fatsmiley: thanks Al
  3. PapaAl86
    thanks,when I used it I did not think about it being a conductor , but I mentioned it to my wife this am. That's why I asked. I didn't have any problems with spark untill about 2 weeks after I used it. thank you for you're help! Al
  4. PapaAl86
    how do I clean conection at key switch? I'm having problems with no spark on back plugs. I read in one forum possile low voltage from key switch,I've already checked ohms on pickup coils & ignition coils. I had a problem with my key, (I could not turn it) so I used black carbon lube in ignition. Could that cause a problem? thanks Al
  5. PapaAl86
    No but ohms tested good. what I thought was strange was no spark at all on rear plugs.
  6. PapaAl86
    My 86vr was running good. On my way home from work.it started acting like running out of gas ,with some backfiring.I checked ohms on pickup coils & ignition coils there OK.But no spark to back 2 plugs.Any ideas would be helpfull.
  7. PapaAl86
    My 1986 vr started running rough,felt like running out of gas, with some backfiring. Checked ohms (pickup coils & ignition coils) there OK. Running on front 2 cyls. Any ideas?
  8. PapaAl86
    My brother had the same operation,he's glad he did. They do GREAT things these days. Good luck,& have a speedy recovery! Al
  9. PapaAl86
    Thank you VERY MUCH!!! I think I can do that. Thanks Al
  10. PapaAl86
    How do I do that? I'm a machinist . I have no idea how to do that!
  11. PapaAl86
    I just bought a new battery , but it's sealed (no vent , no hole for bikes plug in top for computer ? ) I tried to unplug probe (wire ahead of probe) still shows bat. on screen. Is there any easy fix? Or do I need to buy different bat. ? thanks Al
  12. PapaAl86
    I have a 2004 silverado,& the dealer replaced for FREE. Also I didn't buy it from them! Check with one , they changed mine last year.
×
×
  • Create New...