Jump to content

Squidley

Supporting Member
 View Profile  See their activity

  • Posts

    9,977

  • Joined

  • Last visited

  • Days Won

    14

 Content Type 

Everything posted by Squidley

  1. Squidley
    Glad to hear you got it done TJ, now you'll be able to them in no time flat
  2. Squidley
    I had a set on my '99 and loved them, I know Freebird has run them also and was very pleased with them. They are only 2nd to Avon Venoms in my opinion. I got about 13K out of the tires before a spike took the rear tire out and totalled the bike. I'd buy another set in a second and not think twice about it
  3. Squidley
    Send him over to Rick Butler here on the site and have Rick do his mod to the seat. I know there are quite a few here that have had Rick redo their seats and love it
  4. Squidley
    Thats what I do with everyone I do, 400 grit wet sand and just enough pressure to take the glaze off. I install the original disc's back in and remove the half disc in the back and replace it with a full one that the kit includes.
  5. Squidley
    I knew I could get a rise out of someone
  6. Squidley
    I'm not sure yet Tom, we'll get down there 1st and see how it all plays out. BTW, I dont spoon so you'll be safe....really!
  7. Squidley
    He's in a long list of company, they dont last long and can be hard to find and expensive. Has he looked into the option of a Russell Daylong or other mfgrs?
  8. Squidley
    My buddy and I were always at the kitchen table cleaning the pistols when one showed up. My friend would talk with him and how much he liked shooting, show him range targets with the centers gone. His next responce would be when are you having my daughter home?
  9. Squidley
    Now I'm not positive as far as the compatability of the 1st gen caps to the 2nd gen, but I would hazard a calculated guess that the caps would be the same. The only issues I see would be the wire size (which is 7mm on the 1st gens) and the resistor inside the caps being the same. Perhaps Goose has some insight on this.
  10. Squidley
    I too look forward to our eventual meeting, ah yes that 4 letter word that I wont have to live
  11. Squidley
    Scott, The wires are actually molded into the coil, you can't replace just the wires from the coil as is the case on the 1st gen. Like Goose has mentioned the cap can be replaced from the wire. Gibvel's idea for heat shrinking the wires would probably be your best bet.
  12. Squidley
    Thanks TJ, I really appreciate the offer my friend. If you dont get to the clutch today let me know and you could ride the bike over and I could help you.
  13. Squidley
    Doesn't look like she's camera she either, I remember my Grandsons when they were little like that. These are the days you'll remember forever, Cool Beans!
  14. Squidley
    It's getting there buddy, more getting packed in everyday...did I mention that I am really getting a hankerin' for some Cajun food
  15. Squidley
    Good on Ya Annie
  16. Squidley
    Gil....Haven't you bought that camper YET!!
  17. Squidley
    I would believe that it's the same, Pegscraper would be the Guru to ask on that one.
  18. Squidley
    I hate to break it to you buddy....but the listing is gone seeing our own Marcarl has bought it
  19. Squidley
    Yeah, those 305's were junk, I'll take the 350 everyday...thats why my wagon has one
  20. Squidley
    It's good to hear a story with a happy ending...glad you are able to tell it TJ
  21. Squidley
    The phone is on TJ should you need to use it It's all good Jack, I'm right with you on the maintenance. I change out every fluid when I get a new to me bike. The '99 was the 1st one I ran out of time on before we left...I only had it 10 days before we left on that 10000 mile trip
  22. Squidley

    Proud Papa

    Squidley replied to Monty's topic in Watering Hole

    A heartfelt thank you to both of them and to you for serving Semper Fi
  23. Squidley
    I dont disagree with you Jack, and I couldn't agree more with you on the friction discs. Everyone I have mic'ed have been at the stock thickness. I will disagree though as when Lonna and I came to Susanville, I had just swapped my brake fluid in Vogel. Did a complete swapout as I lost my clutch in Knoxville TN with Freebird and knew it needed swapping. I then proceeded to head out to California and by the time I got there the clutch was slipping. When we headed back and stopped at the 1st PIP it was really getting bad. I replaced it when we got back home and never had an issue since. Good thought to check the fluid 1st, but as many as I have seen on the G2's it's been the spring plate failing
  24. Squidley
    Your part of the family here Gary, that is with or without a bike. God does work in mysterious ways, I know how I felt after our accident. Get the body in shape and the mind will follow, you know the drill, he is driving from above
  25. Squidley
    Damn Kiddo! What are you trying to do to us , we can deal with 2021....man you sure know how to jerk the chain
×
×
  • Create New...