Jump to content

N3FOL

Supporting Member
  • Posts

    2,733
  • Joined

  • Last visited

  • Days Won

    55

Everything posted by N3FOL

  1. So for the seal, do I need (2) for the front and rear spline area?
  2. Sounds like this seal may break upon disassembly of the drive shaft. Are the seal on both ends of the Drive Shaft? Do you have a part number that I can order before I start taking my shaft apart in a few months?
  3. I work at a facility that manufactures Diagnostic equipment for healthcare use and DI water is abundant. I agree, it is a good idea to use DI water in the cooling system to prevent rust build up internally. Did a search on Speed Bleeders. I may go ahead and order Two (2) SB8125; 1 for the Rear Caliper and 1 for the Clutch (not sure of the term) and Two (2) SB7100 for the Front Calipers. I hope I got the part numbers correct for my '07 Venture.
  4. I am looking in the maintenance manual, but could not find the page. What Chapter? The large plug under the water pump...is thos towards the right side of the engine?
  5. I was just wondering why a seal was broken...?? Looking at 7-78 of the Maintenance Manual, I see now why the Rear Wheel has to come off......if I am not mistaken the Speedometer Sensor has to come off and then pull on Final Gear Assembly to expose the Drive Shaft after removing 4 bolts (Right?).
  6. You just made me hungry after looking at the pic. Next time, easy on the cheese.
  7. Glad to hear that they caught the bad guys. They sure made the time to travel far away (>60 miles) away from home.
  8. It is hard to go wrong with Vance and Hines. Start on a look out for the brown truck. Let us know how it sounds.
  9. That is exactly what I put in my cars and the same size bottle is available at our local Autozone store here in SE PA. Thanks, Squidely.
  10. Yes, that is all you need...one (1) Signal Stabilizer to take care of the Front and Rear. I installed mine under the seat.
  11. What do you recommend as far as Coolant and Brake Fluid is concerned? Tips on the Coolant change? (will have to consult the Maintenance Manual ) I've seen write-ups on Brake Fluid replacement somewhere...
  12. I agree with you 100%. Looks like this will be in my agenda for the summer. I guess I can simply put in a 50/50 mixture of Anti-Freeze in the system, right? Prestone, maybe? Brake Fluid...maybe DOT 4 or DOT 5...not sure but I will have to check the manual first. Your offer sounds like a very nice idea:thumbsup2:. Where exactly is Duncansville? I will buy lunch and then ride...
  13. Hello Earl. Yes, I agree. I do majority of my car maintenance as well and it has saved me tons of money. My main question on my bike is that it is an '07 and the coolant and brake fluid has been in there for almost 2 years now...but I bought this bike brand new last year and it has only 3K+ miles. In your opinion, would you change brake fluid and coolant this year being it has been 2 years already?
  14. Thanks, Rod. Since my bike will be almost 2 years old and sat at a dealership for most of the time, I may tackle the brake fluid replacement sometime this summer. The coolant may happen after that...before then, I will consult this forum before I go ahead and drain coolant.
  15. Al, You will be much happier if you install a 'Metric Signal Stabilizer' from Custom Dynamics. Install is pretty easy and you will get the full potential of your LED's blinking at a normal rate.
  16. I did a search regarding this, but did not find one. I bought my bike last October ('08) with only 1 mile on the odometer. It is an '07. The Service Manual stated to replace coolant and brake fluid every certain # of miles OR 24 Months. I may be closing in on 24 Months, but I only have 3200 miles on the bike. Do I still need to replace Brake Fluid and Coolant this year or Wait until I reach my 2nd anniversary of ownership?
  17. Welcome to the forum, bendtdj. Lots of folks here that know the Venture very well...it is a great source of information. Congrats on the newly acquired bike.
  18. Get yourself a No Load Metric Signal Stabilizer. Very easy to install (comes with installation instructions).
  19. Good Idea. I would probably paint the black face and mounting area the same color as the fairing.
  20. Good Idea. I would probably paint the black face and mounting area the same color as the fairing.
  21. You probably would've kept the 8 Track.
  22. You probably would've kept the 8 Track.
  23. Jim, stay in close contact with your doctor and do whatever they recommend you to do. My Dad is going through the same situation and he is doing much better after several treatments. Just remember, keep an eye on the side effects of all the medication your doctor prescribed to you. Because they interact with each other, this may give you a Low Blood Pressure condition and is not a good thing while you are riding your Venture. Regards.
  24. Noon is ok with me. We shall hope for great weather. I can meet a group of riders somewhere in the York area (coming from SE PA).
  25. I should have known this long time ago. The law can be very convoluted in many ways and most people can not understand why including myself. IMO, the Senator probably did not have to respond on that letter. I guess they will have to go back to the drawing board.
×
×
  • Create New...