Jump to content

Highway Star

Expired Membership
 View Profile  See their activity

  • Posts

    11

  • Joined

  • Last visited

 Content Type 

Everything posted by Highway Star

  1. Highway Star
    What is the Jetson Chirp? I believe I may have missed something...can you explain?
  2. Highway Star
    Spent yesterday afternoon removing the rear tire and greasing everything with Moly...still the noise when throttle closed. Performance not affected however...I will just enjoy the ride and turn up the tunes for now!!!
  3. Highway Star
    Thanks Wayne!! I will follow your advice.
  4. Highway Star
    Hello again, I do not know the condition of the rear splines or the maintanence on them. The sound only occurs when in gear rolling with no throttle. The faster the speed the louder the sound seems to be. Please reply! I am not a mechanic at all, but want to take care of this if needed.(without a trip to the dealer if possible!) Highway Star
  5. Highway Star
    Thanks Guys!! Like I said I just wanted to make sure I wasn't missing something...
  6. Highway Star
    Hi! I know this has come up several times here...but I just wanted to clarify. My 2000 RSV makes a loud Whining sound but only when throttle is closed...that is once i give it gas or steady gas the noise goes away. Is this the sound I hear so much about that is inherent in the machines or should I be concerned? Thanks in advance for your responses, Highway Star
  7. Highway Star
    Thanks!!!!! Not much of a "Tour'er" per say, 'cause of young children still at home...But can't pass up any thing FREE!!!!
  8. Highway Star
    I still prefer my 2000 RSV! You can't get any better looking and low maintenance than this!!
  9. Highway Star
    I have a set of Road kings and they provide a great low, Rumble. Especially since I also punched out the baffles in them. Previous to this mod I rolled with the original pipes with the rear baffles drilled out with four 1/2 inch holes. This procedure is somewhat described on the "other site" except that I did not removed the rear cone...I simply drilled through it. I really like the sound of these but my wife did not! I actually have these on E-Bay...Best of luck! http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=010&sspagename=STRK%3AMESE%3AIT&viewitem=&item=200252682042&rd=1
  10. Highway Star
    The caps fit onto socket head bolts and our RSV are rounded...the total cost for me was about twelve dollars and took about 5 min to put the caps on.
  11. Highway Star
    I found this tip on the Venturers site...ordered the caps from Reidsupply and aquired the bolts from local Sears hardware...works great!! Inexspensive alternative to more exspensive mod seen on e-bay and other sites... You can easily make your own quick removal bolt set for your saddlebags. No tools needed to remove the bags for service or cleaning. Parts needed for 1-bike are 6 ea. M6X36 and 2 ea. M6X55 socket head cap screws with 1.0 thread pitch. The t-cap heads can be ordered from Reidsupply.com and the item number is SLK-1200. If you want to see the screws the item # are brb-532086p and brb-532094p and there is a limit of 100 each on the bolts, but not on the plastic T-heads. I was able to find my cap screws locally and I didn't have to buy more then I needed. Check with your local hardware store, Lowe's or Home Depot. Just press the T-Caps onto the bolt heads in a vice or small press. I used a drill press to push them in. Also thanks go to Gunny (Butch) for his help to me......Ken http://venturers.org/Tech_Library/attachments/Bolts&Caps1.jpg http://venturers.org/Tech_Library/attachments/DrillPress.jpg http://venturers.org/Tech_Library/attachments/Bolts&Caps3.jpg I used a large C-clamp to press the caps on the bolts...works well...I hope that this helps someone!
×
×
  • Create New...