Jump to content

CMIKE

Expired Membership
  • Posts

    738
  • Joined

  • Last visited

Everything posted by CMIKE

  1. With the stock windshield the chrome gas cap would reflect off the windshield for me. I quickly ordered one of the Yamaha Leather gas cap covers to solve this problem. Been using it for 25000 miles. It is a pain to remove and put on the gas cap when it is new but it gets easier the older it gets. IT works and looks good also.
  2. CMIKE

    RSMV Modifications so far...

    ~Yamaha Billet Air Filter covers with K&N filters ~Yamaha Billet Carb covers ~Yamaha Billet Choke knob cover ~Yamaha Billet Engine Breather covers ~Yamaha Billet Motor mount bolt covers ~Yamaha Billet Oil Filler cap ~Yamaha Billet Passenger floorboard backing ~Yamaha Billet Passenger floorboards ~Yamaha Billet Master Cylinder covers (clutch and front brake) ~Yamaha Billet Front Brake caliper covers ~Yamaha Trunk Rack ~Baron 1" handle bar risers - Added rubber blocks to extend existing rubber block that stablizes fairing. ~Yamaha Leather Gas Cap cover (keeps reflection off windshield) ~Yamaha Saddle Bag Liners ~Yamaha Trunk rack bag ~Yamaha Passing lamps ~Yamaha Tinted lower wind vents ~Yamaha Travel Trunk wing with LED light ~LED tail light (100 LED Super Bright) ~6" LED lights side under travel trunk - RED - low intensity with running lights and blink with turn signals. ~Knight Rider chrome license plate frame. Sequence back and forth with running lights and blink 3-5 seconds when brakes applied. ~3" LED red lights custom mounted under back of saddle bags. Work as running and brake lights. Strobe with strobe unit. ~LED turn signals with metric load equilizer ~LED replacement side reflectors ( installed relay to allow them to blink with turn signals) ~LED brake light strobe unit. Strobe LED tail light, trunk wing LED lights and 3" LED lights under saddle bags. Programmed to strobe 3 times then hold solid. see this link http://www.venturerider.org/forum/showthread.php?t=32917 ~Tented lower wind deflectors and clear plastic on front fairing black. ~Kuryakyn chrome volt meter with key switch actived relay ~Install relay to remove load from key switch. ~Install aux fuse block (6 circuit) under seat. ~Butler thumb screws to attach rear saddle bags ~Front mud flap (modified JC Whitney) ~XM roady ll mounted on handlebars ( power supplied from under front fairing and audio jack split for Aux selection) Also set up to use Ipod here. ~Butler seat mod front and rear ~Utopia drivers back rest ~Kurakyn long horn dually highway pegs ~Removed stock 404 tires with only 5400 miles. New Dunlop Elite 3 on front and rear ~ Zumo 660 installed and works great. ~Install FM Direct adapter under fairing for my XM Roady ll, so I can use the split Aux audio for my Ipod and not have to swap from XM to Ipod. ~Install Revco Dual Air horns. ~SpeedoHealer installed. ~Removed chrome wiskers from fron fairing. ~Moved XM radio to a RAM Mount on the right side and also added a RAM mount cup holder. ~Installed Black Carpet Saddle Bag and Trunk Bag liners ~Yamaha Billet single shifter installed ~Yamaha Clutch Basket upgrade from an "F" to an "I" Basket...big difference ~PCM clutch upgrade. ~Krome Works aftermarket Exhaust installed. 2 PAGES OF PHOTOS...go to page 2.
  3. CMIKE

  4. CMIKE

  5. CMIKE

  6. CMIKE

×
×
  • Create New...