uncledj

First Yammy was an early 70s MX90. I rode it quite a bit, but it never ran right. I kept messin' with the points, which sometimes helped, but I was only 12, so messin' was about all I could do. Second Yammy was about 8 years later, and was a TT500. which was a very capable hill climber. My buddy and I used to go out to the quarries....town was actually named "Hillsville"......which is where I learned to hill-climb. It's amazing what you can ride a motorcycle up if you have the right bike, skills, and lack of common sense. (And a big set of cohonies) Had a bunch of fun on that bike. Next Yammy was my First Gen. The most recent / last Yammy is my Second Gen. (Black Cherry) I love me sum Yammies......

I generally don't get too worried until I start getting above 240 v. I occasionally work on 480v equipment, and I HATE doing it when it's wet out. Some equipment is prone to arc flash when it gets old. Must be carbon build up or something, but I already know that if it's an old Carrier or York, and 480 volt, I'm gonna be extra careful working on it. Generally I prefer to use my meter rather than my finger. lol

I think it was last Summer. I actually had the front of the cabinet off and vacumed it out. Couldn't get all of the vent pipe, which goes under the house to an outside wall, but got what I could with a brush. This scared me enough that I'm going to shorten the vent pipe as well and have a solid 4" pipe going directly through the wall, about 3' to the side of the dryer. This could'a turned out really bad. Someone was looking out for us.

This is pretty good. Read it all the way through..I especially like the suggestion for resuscitation of someone who's unconscious from electrical shock..........The suggested method would tell ya who your friends are....lol... What do you think of this?? The following is from The American Electricians Handbook (1942) A Reference Book for Practical Electrical Workers. Terrell Croft, consulting engineer. McGraw Hill Book Company, Inc, New York and London 1942 Electricians often test circuits for the presence of voltage touching the conductors with the fingers. This method is safe where the voltage does not exceed 250 and is often very convenient for locating a blown-out fuse or for ascertaining whether or not a circuit is alive. Some men can endure the electric shock that results without discomfort whereas others cannot. Therefore, the method is not feasible in some cases. Which are the outside wires and which is the neutral wire of a 115/230 volt three wire system can be determined in this way by noting the intensity of the shock that results by touching different pairs of wires with the fingers. Use the method with caution and be certain that the voltage of the circuit does not exceed 250 before touching the conductors. (This and the several paragraphs that follow are taken from �Electrical Engineeringhttp://forums.mikeholt.com/images/smilies/smile.gif 159. The presence of low voltages can be determined by testing. The method is feasible only where the pressure is but a few volts and hence is used only in bell and signal work. Where the voltage is very low, the bared ends of the conductors constituting the 2 sides of the circuit are held a short distance apart on the tongue. If voltage is present a peculiar mildly burning sensation result, which will never be forgotten after one has experienced it. The taste is due to the electrolytic decomposition of the liquids on the tongue which produces a salt having a taste. With voltages of 4 or 5 volts, due to as many cells of a battery, it is best to test for the presence of voltage by holding one of the bared conductors in the hand an touching the other to the tongue. Where a terminal of the battery is grounded, often a taste can be detected by standing on moist ground and touching a conductor from the other battery terminal to the tongue. Care should be exercised to prevent the 2 conductor ends from touching each other at the tongue, for it they do a spark can result that may burn. RESUSCITATION FROM ELECTRIC SHOCK By Frederick Koliz, MD 1st. Lay the patient on his back, 2 Move the tongue back and forth in the mouth by seizing it with a handkerchief or the fingers, while working the arms to induce respiration. 3. Don�t pour anything down the patient�s throat. 4. Try to cause the patient to gasp by inserting the first and second fingers in the rectum, and pressing them suddenly and forcibly toward the back. 5. If possible, procure oxygen gas, and try to get it into the lungs during the effots at artificial respiration

Took the smoke detectors out years ago. We used to supplement our heat with an old wood burner, and it'd set them off too much. I'll be putting some new ones up.

Was working out in the yard, wife's in the house doin' laundry. I came in to heat up some pizza for lunch, and went up to the loft to watch TV. Wife's sitting in the recliner and says "I smell something burning". I don't smell it yet, but I head downstairs and it hits me like a brick....dryer's on fire...flames starting to shoot out of the seams.....I got a pot of water and threw it on (electric dryer)....grabbed a fire extinguisher and it did nuthin'....gauge shows good.....OH CRAP .....ran out to the work van and grabbed that extinguisher, which did the trick. At this point the house is full of smoke...wife took the dogs and went out on the porch to get air....I set fans up in the windows to create a cross breeze through the house, and now, 3 hrs later, the smell isn't as bad, but still noticeable. Probably gonna have to live with it for a while.... Thank GOD I was at home, and in the house when it happened. Looks like it was electrical....or perhaps friction from the drum to the cabinet...???? I dunno what started it, but it was a pretty scary experience. Bunch of clothes thrown out...that fire extinguisher powder went everywhere. What a mess.... At least we didn't lose the house.

The 338 is a bad puppy. I've a Ruger, and I rarely shoot it unless I have something that's difficult to put a hole in. Last time was a `1/2" hardened titanium plate that I was told I couldn't shoot through. I tried it with an AK47 first, and the AK splattered, and didn't so much as scratch the surface. Seriously....you couldn't even feel a scratch where the AK hit..... .338 popped right through it. I heard somewhere that snipers are leaning towards it....something about the heavier round carrying farther.

I had a friend on a Harley Nightrain, who was next to me on my First Gen at a red light ask...."Geez...is that thing even running?"...and laughed. That was the last thing said before I dusted that bike.

Ya can't keep a good man down. See ya at MD.

Best wishes for a quick recovery... I'll bet Puc can still out-type most of us, even if he's down to 1 finger....on the wrong hand.... This man can put out the text.....and pics.....and video....but always with plenty of positive energy...or good Karma....or whatever you call it, but it's all good. Heal well my friend.

"Tube-steak specialist"???? That just don't sound right. lol Cool trailer though.

A few years back I was rewiring a large Carrier air handler and had 3 bad relays,....new off the shelf. I ended up taking one apart for inspection, and there was a white, chalky substance (oxidation?) on the contacts. I showed this to the supplier when I returned them......The only comment he could make was "Made in Mexico......what'd ya expect". Major brand relay...Mars. In my trade I've learned to question everything, including brand new parts.

I don't think I need one for the second gen, but probably should put one on the first gen. If ya still have one, I'll take it.

I've no complaints. I might talk to him once every couple of weeks. See him maybe 3 times a year. I do my thing, .....do it well....no one messes with me.

T HE F INAL T OAST ! They bombed Tokyo 73 years ago. http://www.shangralafamilyfun.com/galf-j/flower2.gif [TABLE=width: 800] [TR] [TD]They once were among the most universally admired and revered men in the United States . There were 80 of the Raiders in April 1942, when they carried out one of the most courageous and heart-stirring military operations in this nation's history. The mere mention of their unit's name, in those years, would bring tears to the eyes of grateful Americans. http://www.shangralafamilyfun.com/2014/raiders2.jpg Now only four survive. After Japan's sneak attack on Pearl Harbor, with the United States reeling and wounded, something dramatic was needed to turn the war effort around. Even though there were no friendly airfields close enough to Japan for the United States to launch a retaliation, a daring plan was devised. Sixteen B-25s were modified so that they could take off from the deck of an aircraft carrier. This had never before been tried -- sending such big, heavy bombers from a carrier. http://www.shangralafamilyfun.com/2014/raiders3.jpg http://www.shangralafamilyfun.com/2014/raiders4.jpg The 16 five-man crews, under the command of Lt. Col. James Doolittle, who himself flew the lead plane off the USS Hornet, knew that they would not be able to return to the carrier. They would have to hit Japan and then hope to make it to China for a safe landing. http://www.shangralafamilyfun.com/2014/raiders5.jpg But on the day of the raid, the Japanese military caught wind of the plan. The Raiders were told that they would have to take off from much farther out in the Pacific Ocean than they had counted on. They were told that because of this they would not have enough fuel to make it to safety. And those men went anyway. http://www.shangralafamilyfun.com/2014/raiders6.jpg They bombed Tokyo and then flew as far as they could. Four planes crash-landed; 11 more crews bailed out, and three of the Raiders died. Eight more were captured; three were executed. Another died of starvation in a Japanese prison camp. One crew made it to Russia. http://www.shangralafamilyfun.com/2014/raiders7.jpg http://www.shangralafamilyfun.com/2014/raiders8.jpg http://www.shangralafamilyfun.com/2014/raiders9.jpg http://www.shangralafamilyfun.com/2014/raiders10.jpg http://www.shangralafamilyfun.com/2014/raiders11.jpg The Doolittle Raiders sent a message from the United States to its enemies, and to the rest of the world: We will fight. And, no matter what it takes, we will win. Of the 80 Raiders, 62 survived the war. They were celebrated as national heroes, models of bravery. Metro-Goldwyn-Mayer produced a motion picture based on the raid; "Thirty Seconds Over Tokyo," starring Spencer Tracy and Van Johnson, was a patriotic and emotional box-office hit, and the phrase became part of the national lexicon. In the movie-theater previews for the film, MGM proclaimed that it was presenting the story "with supreme pride." http://www.shangralafamilyfun.com/2014/raiders12.jpg http://www.shangralafamilyfun.com/2014/raiders13.jpg Beginning in 1946, the surviving Raiders have held a reunion each April, to commemorate the mission. The reunion is in a different city each year. In 1959, the city of Tucson, Arizona, as a gesture of respect and gratitude, presented the Doolittle Raiders with a set of 80 silver goblets. Each goblet was engraved with the name of a Raider. http://www.shangralafamilyfun.com/2014/raiders14.jpg http://www.shangralafamilyfun.com/2014/raiders15.jpg Every year, a wooden display case bearing all 80 goblets is transported to the reunion city. Each time a Raider passes away, his goblet is turned upside down in the case at the next reunion, as his old friends bear solemn witness. http://www.shangralafamilyfun.com/2014/raiders16.jpg Al so in the wooden case is a bottle of 1896 Hennessy Very Special cognac. The year is not happenstance: 1896 was when Jimmy Doolittle was born. http://www.shangralafamilyfun.com/2014/raiders17.jpg There has always been a plan: When there are only two surviving Raiders, they would open the bottle, at last drink from it, and toast their comrades who preceded them in death. As 2013 began, there were five living Raiders; then, in February, Tom Griffin passed away at age 96. http://www.shangralafamilyfun.com/2014/raiders18.jpg What a man he was. After bailing out of his plane over a mountainous Chinese forest after the Tokyo raid, he became ill with malaria, and almost died. When he recovered, he was sent to Europe to fly more combat missions. He was shot down, captured, and spent 22 months in a German prisoner of war camp. http://www.shangralafamilyfun.com/2014/raiders19.jpg The selflessness of these men, the sheer guts ... there was a passage in the Cincinnati Enquirer obituary for Mr. Griffin that, on the surface, had nothing to do with the war, but that was emblematic of the depth of his sense of duty and devotion: "When his wife became ill and needed to go into a nursing home, he visited her every day. He walked from his house to the nursing home, fed his wife and at the end of the day brought home her clothes. At night, he washed and ironed her clothes. Then he walked them up to her room the next morning. He did that for three years until her death in 2005." http://www.shangralafamilyfun.com/2014/raiders20.jpg So now, out of the original 80, only four Raiders remain: Dick Cole (Doolittle's co-pilot on the Tokyo raid), Robert Hite, Edward Saylor and David Thatcher. All are in their 90s. They have decided that there are too few of them for the public reunions to continue. The events in Fort Walton Beach marked the end. It has come full circle; Florida's nearby Eglin Field was where the Raiders trained in secrecy for the Tokyo mission. The town planned to do all it can to honor the men: a six-day celebration of their valor, including luncheons, a dinner and a parade. http://www.shangralafamilyfun.com/2014/raiders21.jpg Do the men ever wonder if those of us for whom they helped save the country have tended to it in a way that is worthy of their sacrifice? They don't talk about that, at least not around other people. But if you find yourself near Fort Walton Beach this week, and if you should encounter any of the Raiders, you might want to offer them a word of thanks. I can tell you from first hand observation that they appreciate hearing that they are remembered. The men have decided that after this final public reunion they will wait until a later date -- sometime this year -- to get together once more, informally and in absolute privacy. That is when they will open the bottle of brandy. The years are flowing by too swiftly now; they are not going to wait until there are only two of them. They will fill the four remaining upturned goblets. And raise them in a toast to those who are gone. http://www.shangralafamilyfun.com/2014/raiders22.jpg[/TD] [/TR] [/TABLE] Their 70th Anniversary Photo

WOW !!! Looks Great !!!

A well reasoned, expertly articulated response to this situation....whatever it was.... I don't care what any of y'all think.....I KNOW that my 06 Black Cherry RSV with the pillow top seat is the best lookin' production cruiser ever built !!! That's not to say there's some real lookers out there, but I never fell in love with them like I did with my RSV. Differing opinions welcome.

I'll keep you in my thoughts and prayers.

I suffer from these problems, same as many of you, but I find the worst thing I can do is to put something somewhere "special" so I'll remember where it is later...... I may as well throw it out.... The bad thing is I keep doing it, thinking this time it won't be a problem......it always is.

Can't remember where I saw it but there was a fella who cut a hole in the top of his saddlebag big enough for his little dogs head to fit out of, but not big enough for the dog to climb through. Put the dog in the saddlebag and close the lid....dog sticks his head through the hole and he's stylin'. .....was a pretty good idea.

I'm teaching my dog to ride my first gen...I'll ride the second gen right alongside him. He's very smart.

I wouldn't be comfortable doing it, ....but that's just me. We still have a few freedoms left in the ol' US, and one of them is to do things that others may not consider wise. Assuming that's the kids dad, it's up to the dad (within reason) to determine what he wants his son to get away with. Heck, you could make the case that it's irresponsible to let a kid have a dirt bike at all....or play sports.....or leave the house... I was 6 when I first shot a .44 magnum. My older brother was right there with me....then made me put on his motorcycle helmet first, which was a good thing, 'cause the recoil came back and the hammer put a nick in the helmet right where my forehead was. I'd say that he took reasonable care letting a child (me) fire that weapon. The result, all these years later is that I'm comfortable with, knowledgeable and respectful of and proficient with firearms. If you keep kids in a protective bubble, they'll miss a lot in life. I'm sure that ride was illegal....but then there's pretty much a law against doing anything these days. Discretion of the prosecutor in this Nation of Men. Anyhoo, I wouldn't do it, but am not upset that they did...and happy that it turned out OK....as far as we know.

I always tell the young folks I run into that if you're gonna get your hands dirty for a living, it doesn't get much better than what I do. (Commercial / industrial HVAC {sometimes refrigeration} service). Best to get a Union gig, but not the only way to go. Pay scales vary, but generally 60 -100 k per year, a fair share of freedom, respect, and a decent pension / retirement waitin' when you're done. I've been around a bit before I committed to this trade...it was a good move. Just sayin'.

Just got home. Okie dokie, I won't worry about it until I hear otherwise from you. For what it's worth, I literally have buckets and boxes of controls, transformers, contactors, relays, temp / pressure switches and the like. Lately I've been thinking about giving the stuff away to make room, so don't worry about me needing something after I get rid of it.....I'd be sure to have a few more lying around somewhere. Anyhoo, best of luck. I wish you lived a bit closer....a modification / upgrade shouldn't be a big deal for someone familiar with this stuff.

Are you sure you're not having a line voltage power problem? Something fishy there. Heading out the door now, but I'll take another look at the info for that control. I think that if it's not too much trouble it may be worth putting in a newer style controller. I should have parts laying around that you can have to do it. Transformers generally don't have low output unless there's a low input. They also generally don't fail unless they're grossly overloaded to the point where they heat up and eventually short out.