Freebird

I know that the front wheel will. Several have done that. I don't know about the rear wheel though. I'll say though that sounds like a good price. Much cheaper than I've seen them if they are new. I looked for the front wheel only but the only ones I found were on Ebay and they wouldn't sell just the front.

Hello Chopperdavemays, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. Chopperdavemays joined on the 09/20/2022. View Member

Hello sjr1633, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. sjr1633 joined on the 09/19/2022. View Member

If you want new, try Partzilla. https://www.partzilla.com/product/yamaha/4BH-81940-02-00?ref=db0961f5d4c3a5d686e4faee7b384e62ea6c2420

If you are looking for used, Pinwall probably has one.

No, I did not and that's a good point. I'll try it later but I know that it handles much better with air in the tires.

Took the trike out for a little ride yesterday. Though I certainly know better, I had not checked the tire pressure since buying it. Having sat for about a year before I purchased it, I knew better. So I checked the tire pressure before taking it out yesterday and all three were VERY low. Rear tires had about 14 lbs in them and the front about 24 lbs. Aired them up to the proper recommendations and it was amazing how much better it handled. Even the vast majority of the headshake that I had experienced was gone. I was cruising happily down the road when I started loosing power. A quick glance at the gas gauge showed that I was on empty. Having gotten used to fuel injection, I momentarily forgot that I had a "reserve". I hadn't ever used the aux tank before so I just reached over and hit the switch and waited as the bars increased on my gas gauge. I never had to pull over, the bike almost immediately regained power and I continued riding and let it fill from the aux tank until it was about 1 bar from full. I know that you can overflow the main tank if you don't pay attention. It worked amazingly well and I am very happy with it. Otherwise, it was a short but enjoyable ride.

Hello RoyalShootinstar13, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. RoyalShootinstar13 joined on the 09/18/2022. View Member

Hello dhelvey, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. dhelvey joined on the 09/18/2022. View Member

Hello New to hack, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. New to hack joined on the 09/17/2022. View Member

As for the jets. It's hard to give you a answer to that one. I think it basically just takes a lot of experimenting and I've never wished to do that. Here is a write up that I did years ago from information provided by another member.

Removing the buffles is not just a simple remove the screws and pull them out process. There is actually not a real good way to do it. Here is a pictures of the inside of the mufflers. Most everything is welded. You would be much better off to just leave them alone and buy a set of Harley mufflers. A lot of people do that.

Hello JonathanELC, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. JonathanELC joined on the 09/17/2022. View Member

I sent you a message but haven't heard back. I'll. take it if still available.

Just ran across these pictures in the member's album.

I think you are probably right, Mine is original now, I have no problem with the Stratoliner wheel on a RSV but was concerned about putting one on the trike, I guess I'll stick with what I have.

Hello Jimbo, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. Jimbo joined on the 09/13/2022. View Member