Jump to content

Freebird

Administrators
 View Profile  See their activity

  • Posts

    17,943

  • Joined

  • Last visited

  • Days Won

    215

 Content Type 

Everything posted by Freebird

  1. Freebird
    Have you checked these two threads: http://www.venturerider.org/forum/showthread.php?t=15135 http://www.venturerider.org/forum/showthread.php?t=10640
  2. Freebird
    At some point over the past years, that mean Cinderella started calling me Tweety Bird. I THOUGHT it was just her way of being endearing but now I REALLY understand what she meant. Tweety Bird turned 60 recently. Now I know how Cinderella sees me.
  3. Freebird
    Yes, it was a stone wheel. Just happened to be the only thing I had handy but it worked fine. I ran it at full speed. I'll take some pictures of the straps tomorrow when I finish up. This took me about 6 hours. Would have been faster but I wasn't prepared. Ended up making two trips to the store.
  4. Freebird
    Yes, it was a stone wheel. Just happened to be the only thing I had handy but it worked fine. I ran it at full speed. I'll take some pictures of the straps tomorrow when I finish up. This took me about 6 hours. Would have been faster but I wasn't prepared. Ended up making two trips to the store.
  5. Freebird
    I used the exact method that Goose submitted in the tech library. The probe only extended about 1/8-1/4 inch I think below he threads of the adapter. No clearance problem at all.
  6. Freebird
    I used the exact method that Goose submitted in the tech library. The probe only extended about 1/8-1/4 inch I think below he threads of the adapter. No clearance problem at all.
  7. Freebird
    OK....I don't want Cougar sitting around waiting all night. The gauges were not yet secured in the final picture, just stuck in there. They will be straight when I get the straps put on the inside to hold them. In the first picture, it shows that i am cutting the lip off the top of the faceplate. It protrudes further than the other edges so I cut it all the way across so that the lip is equal all the way around for an almost flush mount.
  8. Freebird
    OK....I don't want Cougar sitting around waiting all night. The gauges were not yet secured in the final picture, just stuck in there. They will be straight when I get the straps put on the inside to hold them. In the first picture, it shows that i am cutting the lip off the top of the faceplate. It protrudes further than the other edges so I cut it all the way across so that the lip is equal all the way around for an almost flush mount.
  9. Freebird
    Well folks...I just finished installing my set. I used V7GOOSE's excellent writeup for connecting them including drilling and tapping the 20MM oil plug for the pressure switch and the neat trick for forming new threads for the water temp with the anti-fowler. Everything worked out just perfectly. I did take some pictures and will try to get them posted soon. Still have to put the fairing back together. Fired it up and made sure that all were working properly and no leaks anywhere. The set that I bought have a lot shallower face plate than the Autometer gauges. It only protrudes from the dash about 1/8".
  10. Freebird
    Well folks...I just finished installing my set. I used V7GOOSE's excellent writeup for connecting them including drilling and tapping the 20MM oil plug for the pressure switch and the neat trick for forming new threads for the water temp with the anti-fowler. Everything worked out just perfectly. I did take some pictures and will try to get them posted soon. Still have to put the fairing back together. Fired it up and made sure that all were working properly and no leaks anywhere. The set that I bought have a lot shallower face plate than the Autometer gauges. It only protrudes from the dash about 1/8".
  11. Freebird
    Shhhhhhhh....................you COULD forget about such things. It was that dang E-Fishin that causes it. He got leaned over too far and was about to drop his bike. I put my sidestand down and ran to help him save that Antique and then mine rolled off the stand. Go figure.
  12. Freebird
    I agree with you. But there are places to discuss such things and there are places that are not appropriate for it. VentureRider.org was not created to discuss politics. The hope for this site is that we enjoy and discuss the things that we have in common, not those that might separate us. There are plenty of site's on the Internet where political discussion is welcome and encouraged.
  13. Freebird
    The point is not whether or not you give a ***. It will STILL be deleted if it gets nasty. The rules here are VERY clear, political debate is not welcome. I don't blame anybody for getting upset about this proposed change, I agree with you about it. The problem is that too many people can't discuss such an issue without it degrading into a discussion about who we voted for, why we did so, etc. Such discussion is simply not allowed here. I am in 100% support of our troops. If anybody were to come on here and start making nasty remarks against those who have dedicated their lives or a few years of there lives to the noble task of protecting our freedoms and safety, they would be unwelcome at this site. PERIOD Regardless of that though, this site was not created to discuss politics. Already there have been posts that have nothing to do with the actual proposal you posted about. Expect this thread to be gone pretty soon.
  14. Freebird
    I don't have a cross reference but did find these. PRO-TEC Part # 166MP FRAM Part # PH9837 WIX Part # 51522 ACDELCO Part # PF61 FRAM Part # TG9837 BOSCH Part # 3423
  15. Freebird
    Hey, no problem. If we were able to pull that off, I would just take off a couple of days and drink with you.
  16. Freebird
    Here is a write-up by Cougar that should show you where all the spacers and etc. go. http://www.venturerider.org/forum/showthread.php?t=515 As for the mufflers, I've had both sides off my '99 many times and have not yet needed to replace the gaskets.
  17. Freebird
    Sorry, I can't help because I just changed the entire rear end after getting it from SportMax. I understand that there are some critical clearances/adjustments that must be done correctly but I have no details.
  18. Freebird
    I think I'll stick with the Sunpro. I like the chrome and don't see why those would be worth double the price.
  19. Freebird
    I think I'll stick with the Sunpro. I like the chrome and don't see why those would be worth double the price.
  20. Freebird
    Yes, there are a lot of 2" and up gauges to pick from but the 1 1/2" are a bit harder to find. The Sunpro that I posted the link to are 1 1/2" though.
  21. Freebird
    Yes, there are a lot of 2" and up gauges to pick from but the 1 1/2" are a bit harder to find. The Sunpro that I posted the link to are 1 1/2" though.
  22. Freebird
    Here is an excellent article submitted by V7Goose. http://www.venturerider.org/forum/showthread.php?t=19119
  23. Freebird
    Here is an excellent article submitted by V7Goose. http://www.venturerider.org/forum/showthread.php?t=19119
  24. Freebird
    Well, it's not Banff but this looks like a beautiful place to stay. I was just swapping emails with Mark, the owner, last night. He is offering VentureRiders a 10% discount off their posted rates. I would love to spend a week...or month...or so....here. http://www.canadiancountrycabins.com/ I'll be adding them to the "Vendors who offer us Discounts" section later today.
  25. Freebird
    I'll try again. I got them at: ADVANCE AUTO PARTS :rotfl::rotfl: I just looked at the receipt again, the price was actually $29.88.
×
×
  • Create New...