Jump to content

bigbob

Expired Membership
  • Posts

    150
  • Joined

  • Last visited

Everything posted by bigbob

  1. It will be quite awhile before I can use it, still snow on the ground here.
  2. WOW!! that is a good price. Best price I could find up here is $20.00 per can ..with free shipping
  3. Last summer I went to A 3M place to get a quote on getting my Hannigan trike done. The guy there told me that the fenders had a too complex shape to install a 1 piece sheet He said he could do with 3 piece & a lot of time And didn't really want to do it. I Saw a product online called PLASTI DIP. It's a multi purpose air dry, synthetic rubber coating that can be easily applied by spraying,brushing,dipping. If you don't like it you can easily peel it off. I got me a spray can of clear to try it , if it ever warms up around here Ride safe Bob
  4. I made my own using the handle from a small screw driver about 2in long, drilled & tap new threads. The length makes it easy to get at with fingers. Bob
  5. That is what I used to think also, till I had to trailer my trike. When I got to where I was going the seat was loose on the trailer deck. I don't do that anymore. Ride safe, Bob
  6. What he said. Did the trunk lock,next the gas cap. Bob
  7. A friend had a similar jack that was made in China. There are no serviceable parts available. He made a regular hyd. jack work. Bob
  8. bigbob

    aharbi Down

    Wishing him all the best, exchanging information is a very good idea. You never know whats around the next curve. Ride safe, Bob
  9. no deals here and that's with a clean licence, with points the cost goes up fast.
  10. $25.00 per year in Sask.
  11. I got those lites at canadian tire in Canada. I've seen them at Shadow trailer parts,item #st-50-767751. in the US. They are LED tail, signal, brake lites. You will need a 5 to 4 wire adapter to make the brake lites work. I don't have the brakes lites working. Hope this helps,Bob
  12. Hi Brian,since june 5th I put around 12000 kms/ 7500 miles, after P.I.P. should have a few more and hope to have a lot more before fall. Was going to call you if you would like to go see Pete with me one of these days ?? let me know. Ride safe Bob
  13. Guess where this is located. Bigbob
  14. Another thing about that engine there is nobody home until it gets to around 5000-6000 R.P.M. Red line is at 9000 R.P.M. will go to 9500 R.P.M.
  15. Larry, we met in Cody last year. I was the guy with the Spyder. Going to try to make P.I.P. this year hope to see you there. Bob.
  16. Here are a couple pictures of my new trike...and new grandson. Bigbob
  17. No Rocket I was looking for some thing to ride for more than 20 min. without my right hip hurting. Think I found it. On thursday I rode it for about 5 hr. with no pain. Good chance because this was my last kick at the can. Bob
  18. Yes I would like to but don't have a clue how. Send me your Email address so I can send them to you so you can post them here OK? Ride safe Bob
  19. Having a Hannigan trike built next week, will it come with the newer stainless steel rotors and hard pads? Can't wait to get it, Bob
  20. Tried them, waste of money. Ride safe Bob.
  21. Last summer I installed 4 new tires on my car with 3 oz. of BBs in each tire. every time I changed speed it vibrated for a few seconds than smoothed out again till the next speed change. Cost me $50.00 to get them taken out & reballanced on a machine. Anybody want to buy 2.5# of BBs?? Ride safe Bob
  22. FYI I took those off my 2004, only about 6000 kms on those muffs. Good choice Tom white would of been nicer. red is OK Bob
  23. The steering is not a fly by wire. It is a 12V power steering. Works good. Ride safe Bob.
  24. Good morning Rick. Look in your parts box, If I remember right I gave you my controler off of my RSV. Ron took it off the bike. The leadin wire was cut to get it off the bike. This was a brand new unit only about 2 weeks old. Ride safe Bob.
  25. My CAN-AM SPYDER does that
×
×
  • Create New...