Sclark

Thanks much. I have family in Johnson Cuty and visit often. Will look him up.

Thanks for the quick reply. I was expecting the bad news. Will get to it eventually. Looks like a few good used middle drive gear units are reasonably cheap on fleabay.

Good day. New member here in Northern Alabama. I searched related topics but could not find an answer. I Picked up a 1989 Venture Royale in original condition with 44K miles. Bike had not been started for 5 years. After cleaning carbs, changing fluids, freeing up brake calipers and cleaning all electrical connections, the bike fired up beautifully. As I set sail on the maiden first ride, a noticeable rotational clatter came from the transmission area as I let out the clutch. The clatter frequency increased with road speed when under load. I pulled the left side transmission cover (the one with six Allen head screws. Small amount of oil drained from the bottom hole at 6 o’clock. I found about 6-10 gear teeth fragments (1 or two were about half inch in length and you could see the spiral shape). Aside from the risk of fragments floating elsewhere, my question is “can the middle drive gear be replaced without pulling the engine?” I’m thinking possibly could be by pulling driveshaft and swing arm but looking for first hand knowledge. Thanks in advance. Steve