Jump to content

woz111

Expired Membership
 View Profile  See their activity

  • Posts

    128

  • Joined

  • Last visited

Everything posted by woz111

  1. woz111
    I am sorry buddy, I'l list it in the right place now ( Sorry.
  2. woz111
    Deleted
  3. woz111
    Hi all, I'm trying to find a new Air Suspension Control Panel clear plastic window to replace my broken one?
  4. woz111
    Thanks for the info Paul, yes you do make a point, so there's no real benefit in doing it, I thought it was self levelling and adjusted to the road as you go along?
  5. woz111
    I'm thinking of adding the class (Computerised air levelling system) to my standard 1983 XVZ1200, I know I'll have to change the wiring loom and add the rear compressor and right control panel so my question is, "has anyone done this already"?
  6. woz111
    Yes sorry, its the clutch switch that I meant, its got something to do with the cruise control and goes into the clutch, my one's snapped.
  7. woz111
    Hi all, anyone got a spare left hand cruise control kill switch for an 84 Venture Royal for sale? My one works but one of the lugs that hold it in place has snapped?
  8. woz111
    Hi,try cleaning the plates first, as you know, using an oil that's not recommended WILL result in what your experiencing? So if I were you, I'd take the plates out and stack them in the order that you remove, so they can be put back exactly, clean them up with a de-greasing liquid, let them dry out and them refit. One other thing, Never do as you suggest and put a washer behind the springs, if they are worn, change them, they'll only snap otherwise and could cause you a lot more damage.
  9. woz111
    Hi, this is the best site to be on for us Venture riders, so stick with it, I'm quite sure you can dish out the stick as good as the rest. Like most of the guys have said, you'll find it hard to get hold of an original 1st gen tool kit, you can, however, buy some of tools NEW, like the final drive measuring stick, take a look in the parts catalogue, which you can also download from this great site.
  10. woz111
    Hi all, I have rebuilt two units and both work fine, if anyone's got some non-functional TCI units please send them to me stating the year of the bike and I'll see if I can repair them, like I stated though, if the pcb boards too damaged, trackways burned etc then there's not much that can be done:178:
  11. woz111
    Hi Dan, take a look at the track ways, so's long as they are still intact you should be able to repair it. if you can post a picture of it here, I'll have a look at it and tell you what I think? Its a shame you can't buy new pcbs?
  12. woz111
    Get the seat shaved, that'll give you more ground clearence for your legs, I've ordered quite a few parts with Pinwall Cycle Parts and can report that they are a good company to order from. 1st gen's the ONLY way to go mate, I love the 1st gens, so stick with it.
  13. woz111
    I agree that it may be the TCI unit starting to fail, if your good with a soldering iron repair it, its not too difficult, if your not I can repair them so's long as the PCB's not damaged, so email me?
  14. woz111
    Hi Guys, yes, remember these O rings are 20+ years old now, just change them and you'll have no more leaks, remember to clean everything up first though.
  15. woz111
    Hi, use Plastex, take a look on eBay at item number:- 110323693080 Just copy that number and paste it on the ebay search bar. I used it to completely repaire all the plastics on my Venture, works a treat.
  16. woz111
    Thanks Brad, same to you mate, have a good one.
  17. woz111
    Haha, I like that one Lou, Happy New Year, and may next year be more prosperous.
  18. woz111
    Hi all, here's wishing everyone on this great site a "Happy New Year"from Wales in the UK.http://www.yamahaventureclub.co.uk/forum/smileys/smiley31.gif
  19. woz111
    Try putting a pan under the drain valve to see if it is actually that that's leaking first, I'd also say its that though, our bikes are 20+ years old now so change those old O-rings, your bike will love you for it.
  20. woz111
    Hi George, yes I've got the bike running good and its got an MOT, we have to put an MOT on our bikes every year, just to make sure they are road worthy, I've still got to get a windscreen and Ariel for it to finish her off, but it is drivable as she is thanks for asking:thumbsup:
  21. woz111
    Hi all, thanks everyone for your wishes its much appreciated, I hope you all have a great day as I have, and don't get too drunk. Its not snowing here in the UK, its quite mild, anyone had snow in the USA, or anywhere else in the world?
  22. woz111
    Hi all, I just want to wish Everyone on this site a Very Merry Christmas, & hopefully, a prosperous New Year. "MERRY CHRISTMAS EVERYBODY".
  23. woz111
    With the blank LCD, try removing the headlight, take it off completely so you can get to the back of the dash/display unit, look for the two thick cables that go into the clocks and take them out, squirt some electrical contact cleaning fluid onto the connectors and put back in to try. I hope you get the display working by doing this, I did as when I was working on my bike, the LCD went out altogether, then worked intermittently like yours.
  24. woz111
    Hi Dan, can't you take the fuel tap off and take it apart to clean it up, it should work perfect then. My tap's the same, I'll overhaul it in a few weeks, let you know how it goes then if you want?
  25. woz111
    Hi all, thanks everyone for your help, its much appreciated. If I'd have caught the kids on the day I'd have done a Homer Simpson on them and strangled the little ****s. Barry, I'm still after a windscreen and Ariel for the Venture if you have them? Much appreciated again for your help:bighug:
×
×
  • Create New...