Jump to content

Marcarl

Super Moderators
 View Profile  See their activity

  • Posts

    11,393

  • Joined

  • Days Won

    153

 Content Type 

Everything posted by Marcarl

  1. Marcarl
    Careful it don't fall off:rotf: Looks like what HD puts on theirs
  2. Marcarl
    With 2 up I have no problem with 1200 rpm, but it will take off from idle, 1000, if I'm carefull. Normally I just clear the carbs with a little blip on the throttle and we're away.
  3. Marcarl
    Haven't had a real runin with demons lately, but if you're selling I ain't buying. I would think ignition switch as well as the 'demon' seems to be centrally located. Don't know how 2nd gens are put together, but off hand I would pull the plug on the back of the switch and use a jumper in the plug to see if things will happen normal like. If they seem normal then I would replace the switch.
  4. Marcarl
    Just to keep the record straight, an 87 is a first gen.
  5. Marcarl
    Radio off or on? or maybe the early warning signal for peg scapping.
  6. Marcarl
    So if it's really the clutch basket does it whine at a cetain RPM not matter what gear you're in? If it's not RPM related then in my opinion it has to be in the tranny and not the clutch. Maybe this is why some have luck with a basket change and others do not.
  7. Marcarl
    You may also have a bad diaphram in that cylinder\carburator.
  8. Marcarl
    I didn't think mine would lock either, but then it works just so, it's tricky but it works.
  9. Marcarl
    Is it the starter button. Do you have lights Does it turn over or attempt to turn over at all Check the battery voltage when turned off Remove negative lead from battery terminal and see if you have spark when touching it back on. Something may be draining the battery. How much lights etc. are you running other than stock. Just some thoughts Carl
  10. Marcarl
    Now you've got me wondering????????? You take the bolts from the water pump, cut off the 'eads, and use them for the stator install. Now what 'appens to that there water pump, don't it need the bolts anymore or do ya just glue the 'eads back on, bye.
  11. Marcarl
    None of that stuff in my life, lifes too short to waste, worrying of such things. If I did have an issue, you would receive a PM from me or maybe a visit, that's if you paid the airfare, because being Dutch I'm toooo cheap to pay for such things. Glad to have you on site and appreciate your input, even the language is sometime cute, keep it up, it's enjoyable.
  12. Marcarl
    So I learn something everyday. Never gave that issue any thought seeing as I have an 85. Guess I can go back to bed now seeing as I've had my lesson for the day, don't want to gain too much knowledge in one sitting, got to leave something for tomorrow. Old man said once: You will never die as long as you keep working, maybe that goes for learnin as well. Thanks Squeese Carl
  13. Marcarl
    Now why is this info so handy.
  14. Marcarl
    Haven't had that for a long time, so long I can't remember ever anybody doin it, but come on over, you're welcome as always, and I'm sure we'll get it working elpronto.
  15. Marcarl
    I've done both and both or either could be the problem. Need some help, just ask. carl
  16. Marcarl
    That would be my guess, if it was the front you would probably notice it in the steering, vibration, or something like that.
  17. Marcarl
    Not really all that good with numbers, but maybe you could tell us what you are running for lights etc. The other problem may be your battery, if it is losing it's charge your stator will have to work hard to keep up and so get itself fried. Measure the voltage of the battery before startup in the morning and then see how long it takes to get the battery up to 13.9 volts. Your battery should read minimum 12 volts before start up and it should only be a minute or two to get it back to 13.5 - 14.5 volts. If it doesn't give you 12 volts before start up, take the negative cable off over night and do another read. If the voltage is down below 12 have the battery tested or just replace it if it's over 2 years old.
  18. Marcarl
    All good replies and I'm totally agreed with pulling the whole system apart. If your brakes fail to do what you expect if them, then you may have a lot of time to think about it later, along with the fact that another set of brakes on another scoot cost more than what you would spend now in time or money. JMT Carl
  19. Marcarl
    If and when you do change the CB attenna you need to set the SWR. If that is not right you will still burn out the transmitter. I thought you might know this, but then a reminder is a lot cheaper than a new CB. The taller attenna will give you more distance than the shorter one, but that to me means very little as I ride mostly with 1st gens, and when I ride with any others I just slow down to about 1\2 speed so they don't get tooo far behind, or I let them lead and then I save the wear and tear on 4th and 5th gears.
  20. Marcarl
    You need to have a weee bit of play on the handle when it's released, do you have that? This is starting to really drive me bonkers. How much tourque on the clutch springs? Did you line up the clutch plates properly? Maybe somebody put in the wrong size push rod, so maybe check that out, pull the cover and make sure it returns all the way and allows the clutch to come together completey. I'm gone all day, 'see' you tonight.
  21. Marcarl
    What is it and what's it used for?
  22. Marcarl
    Not sure I got it all right but here goes: 83 + 84 are the same except for the difference in models which is slight and can be worked with 85 the travel trunk changed and got larger, and it is the fastest of all. 86 it became a 1300 up from the 1200. trunks got a little bigger, trunk and side bags were bolted on and more changes were incorporated overall, + some changes in the radio setup
  23. Marcarl
    Bongobobny is just around the corner, Marcarl is not that far away, JGerom is a stone's throw away. Hey, we're all over you there bud, post away and you'll entice us to come and see you. Fact is that tomorrow evening, June 30, we are having dinner in Fort Erie, come and join us and see if we're likeable.
  24. Marcarl
    Glad I found this site, such nice and helpful people and now I know all about pushing and turning on buttons and getting tunes from a radio. This is soooooooo awesome!!!!!!!
  25. Marcarl
    Can't argue here. It all seems to be very true.
×
×
  • Create New...