You will have to remove the fairing and windshield. You will see the radio, it's the black box, remove it. Four 8 mm bolts and it will slide out the right side. the Tape deck is under the radio. There is two 10 mm bolts (one on each side and two Phillips head screws behind the door of the tape deck. You can unplug the controller from the radio and leave the radio in the bike, It will not be hard to re install if you decide to later. You may have to loosen the top headlight bolts to give you room th get the tape deck out. Hope this helps ,it's been a while since:080402gudl_prv: I did mine.