Jump to content

Rocket

Expired Membership
  • Posts

    2,485
  • Joined

  • Last visited

Everything posted by Rocket

  1. Here is a link, of one replacement unit, that you can use. http://www.buckeyeperformance.com/p01.htm
  2. Or stuff him with cheesecake (not hard), he will be too stuffed to escape the spit......:rotf: Oh, a 4 legged pig is going on the spit..... Disregard, my comment above........:rotf:
  3. Can you hear the air being released???? If you turn the key off, then back on it will show no pressure (after power up display) until you select front or rear, to get a reading from.
  4. What is gone on the shock?? Progressive suspension makes a replacement spring for the Royales. Here is a link for a ebay dealer, that I'm pleased with, I have had multiple dealings with him. http://stores.ebay.com/Marys-Motorcycle-Parts-and-More_YAMAHA-VENTURE-ROYALE_W0QQcolZ4QQdirZ1QQfsubZ11QQftidZ2QQtZkm
  5. See this link below for pulling the collector out of the way. Once the rear down tubes are loose, you can get at the inner retaining nuts, for the exhaust port adapters. Why not change those head to adapter gaskets while at it, they are cheap & a PITA to get at. Check your other gaskets too. After all, how many times do you want to tear it apart, to seal leaks. To remove the rear down tubes competely, you can move the rear master cylinder & reserviour, or remove the rear valve cover to get the needed clearance. http://www.venturerider.org/forum/showthread.php?t=1002
  6. Good, I just might do the US route, heading over to Ontario. Guess I'd better submit my leave pass this week.
  7. Haven't you even seen the movie, Harry & the Hendersons........:rotf:
  8. George, the puller I bought last year came with metric & SAE bolts in various sizes. If one size of the included bolts, can be threaded in more than a few threads by hand & not a sloppy fit, it should be fine. I am finding that my 95 Chev truck has a mixture of metric & SAE bolts / nuts on it (depending on which component I'm working on).
  9. A harmonic balancer remover tool, from an auto parts store works nicely. I pulled mine for a look last year.
  10. How about another update of batteries ordered, Jack???
  11. I was thinking more along the lines of a loose pin, where it could slide out a little, causing intermittant problems. Another possiblity is the friction plates could be sticking some, as well. But between us, we should get this nailed down.
  12. Not knowing your location in BC, I would recommend going through a lower mainland member, that is located very close to the border, paying his expenses in getting you 1 or more tires from southwestmoto (facility fee, border taxes, fuel & any additional shipping to get tire(s) to you). SWmoto ships free in the US for 2 tires, some members use a drop ship facility on the other side of the border. They then pick up, bring across border & ship to the needing member. Best way I have found to pay a CDN member is by online banking E-money transfer.
  13. Yup, as they are normally sold in packs of 2 bleeders, you will need to buy 2 packs.
  14. Same here, met them on Vancouver Island, a week before I attended Marcarl's meet. Glad it is not worse..................
  15. Same as doing the brakes. Yup, replaces normal bleeders, makes it much easier & quicker to bleed / flush the system.
  16. That must be from getting around by dog sled......... BTW do you have any melt happening yet, up there?????
  17. http://www.flatoutmotorcycles.com/fiche_section_detail.asp?category=Motorcycles&make=Yamaha&year=1984&fveh=80 This link is for the basic 1984 Venture, there is another for the "D" model of the same year.
  18. Look under sidecover parts diagram, item #3 & 12 it is part # 41R-2179E-00-00 "BAND,SIDE COVER" & listing at $8.90 each at flatout mc.
  19. Nope, not me..... I have gone through WuzzFuzz on a previous order.
  20. This had been the best one so far.... :rotf:
  21. Mine is white too, but in the shape that squid showed in the pics. So, maybe a repair was previously done, with what was available....
  22. The plug is the right shape for a speaker connection.
  23. Ok, a new one at Flatout Motorcycle CHAMBER 1 26H-14731-02-00 $363.69. Go to the exhaust page. http://www.flatoutmotorcycles.com/fiche_section_detail.asp?category=Motorcycles&make=Yamaha&year=1987&fveh=224
  24. But then, the type of tank is not specified, it could be a storage tank of different types (including for home heating fuels). This will open it up for many more members. Cliff, you should be to be a little more specific, to clarify your pic intentions.
  25. 18MM deep socket will do the trick, I normally use a U joint between that & the ratchet, to give just enough height.
×
×
  • Create New...