Jump to content

Rocket

Expired Membership
  • Posts

    2,485
  • Joined

  • Last visited

Everything posted by Rocket

  1. You never know, My 83 & 86 weren't bad to pull off:thumbsup2:, but friesman's 85 was a royal PITA to get off........
  2. Too bad I don't have room for it, on my way back to the wet coast, later this week. Otherwise, I could of made a side trip to get it, on the way home, bypassing you Rick.........
  3. Yammi dealer (need to order in) PLUG,SPEC'L SHAPE 90338-11152-00 Qty 4 & retails at $5.74 each.
  4. Yup, the collars are only to help keep the spacer lined up, while inserting the bolt. I encountered this a few years ago, with the solid mounts from Buckeye & did the same fix.
  5. I have 2 1st gens, that will be racking up the milage this summer (guessing at about 10,000 miles). That is, if Grump can handle the 83 VR ok & I will be on the 86 VR. Next month will be the test for him, on which bike he rides, the 83 VR or the 750 Nighthawk. I have been riding the 83 for 4 years & it has thoughly been gone over in this time. Bought the 86 last summer & it is well on its way to being ready. I still have a few small things to install & check out. :mo money:
  6. More likely, worn out parts as well, hence the Trailer Queen scoot. I still recommend a trike for you, to keep you upright & riding.
  7. Only thing, a magnetic bag will not stick to ABS plastic. You probably didn't notice, he is riding a 1st gen & sits above the fuel tank. I think others have used, strap on tank bags, but not positive on this.
  8. Steve beats you over to PIP, so he will probably be waiting for you, as per normal......
  9. Post count is showing up on the posts again, as per normal, when you do these things.
  10. For those that need it, here is a form that may come in handy...... I gave one, to my previous superviser today, after finding it......
  11. It went from Muffinman's to Dano's (1st leg), now it needs to get to Portland Oregon, prefferably prior to the month of June. In order for it to be hooked up to Aussie Annies bike, that is being shipped over from Austraila, for the summer.
  12. Is there a place that makes awnings nearby, they could make him a custom made bib.... :rotf:
  13. More likely a progressive rear shock assy, at that price.....
  14. 19mm & 3/4" are the same size 17mm & 11/16" are the same size Cdn tire will have 18mm
  15. Yup, soon I'll be away from this ice & snow......
  16. Yammer better not let the Warden, see this thread..... He was the first one I thought of, on my initial read of it.
  17. Normally the green stuff at a 50/50 mixture, but look to see what colour was put in first. As you do not want to mix Dex cool & the green stuff. You can get the antifreeze as a premix or regular & mix it yourself. 1985 - 2007 Vmax 1200 starters will bolt right up.
  18. Not used, but here is a couple of links I found http://www.assistech.com/tty.htm http://ecom.virtual-vendor.com/web/100015/www/
  19. Only, if they start looking like Cupcake or Black Owl........... :rotf:
  20. Also if the stock fork springs are still in there, it will not have as much lean as well. When I put progressives in the 83, it raised the front end by 3 inches, increasing the sidestand lean.
  21. Sounds about right........
  22. Also check the cassette deck connection, sometimes a fubared cassette deck will result in no sound. One way to test, is to jump the power pos & neg on the cable that plugs into the bottom of the cassette deck.
  23. What cable, it is an electronically operated needle (like a coolant guage), for his tach.......
  24. 83 vacum location is different, than any other year. Try switching to the later model vacum port & test. Let us know of your results.
  25. I remember a couple of them pulled on one of our transport guys years ago (he was also coast guard auxiliary)..... 50 feet of shoreline (thinking it was rope) a bucket of prop wash See if they fall for these if not sleep deprived, as this guy was at the time, during an FTX......
×
×
  • Create New...