Jump to content

Rocket

Expired Membership
 View Profile  See their activity

  • Posts

    2,485

  • Joined

  • Last visited

 Content Type 

Everything posted by Rocket

  1. Rocket
    Look for any cracked solder joints on the CMS. But usually they are the ones for the plug terminals, that you had so much fun unplugging the other half from the CMS.......
  2. Rocket
    Yup, 1st postion to the left of "off" is forks locked & 2nd position to the left is forks locked & park lights on (draining the battery)....... So Brian, when did you try out this feature????
  3. Rocket
    Not knowing about those marks, closer to the slave cylinder opening. But one of the manually inscribed numbers by the serial # is for middle gear shimming, as per attached file.
  4. Rocket
    The upper clamps squeeze the top of the fork tubes, resulting in more resistance for unthreading / threading the caps. Loosen the clamp bolts to remove the added resistance.
  5. Rocket
    I will call tonight, Brian...... Seeing I know your bike, better than you do.
  6. Rocket
    Big time difference................
  7. Rocket

    Planned Trip

    Rocket replied to Rocket's topic in Watering Hole

    Just over a week left, before departure...... Hopefully hwy 2 across Nodak is not flooded.
  8. Rocket
    http://www.rivcoproducts.com/products/product.php?productid=60&cat=202&page=1
  9. Rocket
    But they are not listed seperately, so you will need to get them from some parts bike, or make new ones. Probably quicker, to make new ones, yourself.
  10. Rocket
    It is also interesting to drive in a roundabout that has has a machinegun nest, protecting the statue in the center of it. Grump, you should remember the "Billy, the bomber" statue in Nicosia, not too far from Ledra Palace.
  11. Rocket
    SCREW,PAN HEAD 98580-03008-00, Qty 4 each. WASHER(3SX) 92907-03600-00, Qty 4 each Have not found the plates.
  12. Rocket
    My brother had a bayliner, also with a 305. The 40 amp circuit breaker (at rear of intake manifold) had eventually gone kaput. Might be an idea to check that & the fuse block connections, ignition switch as well.
  13. Rocket
    "Ice Cream Parlor Etiquette?" Keep Big Tom at the back of the line, so the others can get some..........
  14. Rocket
    Rick, this has been here, about a couple of years or so. For multi quotes, select the various quotes by multi quote for most quotes wanted to be included, followed up by the final quote. EG: multi quote 1, multi quote 2, multi quote 3 & finally quote 4. Here is an example of useage from another thread below. Cut & pasted into this one, this was multi quote 1 & quote 2.
  15. Rocket
    I don't have any details on the ride & will be attempting to recover from the EME Branch Regimental birthday party Sat night. We also have something else, going on at the unit on Sun, think it is a unit Family BBQ as unit summer stand down is almost upon us, but it is a non uniform weekend.
  16. Rocket
    Have you gotten any better, at backing up the RV, with a trailer yet??????
  17. Rocket
    Didn't it take you 3 days, last time, to get there?????? Maybe Gary has a lighter trailer this year, so you can get more wind on your face. As he is driving the truck & both the bikes are strapped / bolted down (with you sitting on yours).
  18. Rocket
    Including you, after installing the customizing dent in the fuel tank, amongst other things. Scoots are not supposed to lay down & nap, while you are actually riding it... That is why Russ, usually has it bolted to the trailer. At least, I wasn't repairing my scoot.... I replaced 2 stators (at the same time), after they were overnighted in, for Marvin & Grandpagak.
  19. Rocket
    The OEM Mk2 cords could be a bit different, as there is a different configuration used (additional controller cords plugged in). But the J&M ones will work, for at least the basic setup, as I have not needed to play with the Mk2 cords. Maybe, try bypassing the remote controller cords, one at a time, to narrow down & locate the problem. J&M Cords still listed http://www.sierra-mc.com/proddetail.asp?prod=JM-YV-41 The music amp cords were a 1st attempt & not waterproof, as I found the J&M cords slightly later after making them. J&M kit includes a noise filter & cord holders.
  20. Rocket
    There is a chance, it will be found, in time for the rally......... :rotf::rotf:
  21. Rocket
    I think, that is straight out of the tranker trailer, a large balloon is too small... :rotf:
  22. Rocket
    Yup, no problem... Only headlight & windshield trim is different, for the front portion.
  23. Rocket
    Been away on exercise, so just starting to catch up COVER,CASSETTEDECK 26H-88153-00-00 $21.99 @ partshark.
  24. Rocket
    If there is, the 2nd genners can eat the spicey stuff, for max afterburner, to try & keep up to the 1st gens.......
  25. Rocket
    Who are you?????
×
×
  • Create New...